![Kenwood KMM-102 Instruction Manual Manual pdf 18 page image](https://manuals-archive2.s3.amazonaws.com/5242396/b2d8fe009937a4164b0b271855058c4218f.jpg)
18SPECIFICATIONSTunerFM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space)Channel Space Selection 50 kHzUsable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω)Quieting Sensitivity(DIN S/N = 46 dB)17.2 dBf (2.0 μV/75 Ω)Frequency Response (±3 dB) 30 Hz — 15 kHzSignal-to-Noise Ratio (MONO) 64 dBStereo Separation (1 kHz) 40 dBAM Frequency Range Band 1 (MW) 531 kHz — 1 611 kHz(9 kHz space)Band 2 (SW1) 2 940 kHz — 7 735 kHz(5 kHz space)Band 3 (SW2) 9 500 kHz — 10 135 kHz/11 580 kHz — 18 135 kHz(5 kHz space)Channel Space Selection Band 1 9 kHzBand 2/ 3 5 kHzUsable Sensitivity(S/N = 20 dB)MW 29.0 dBμ (28.2 μV)SW 30 dBμ (32 μV)USBUSB Standard USB 1.1, USB 2.0 Full SpeedFile System FAT12/ 16/ 32Maximum Supply Current DC 5 V 1 AFrequency Response (±1 dB) 20 Hz — 20 kHzSignal-to-Noise Ratio (1 kHz) 105 dBDynamic Range 88 dBChannel Separation 90 dBMP3 Decode Compliant with MPEG-1/2 Audio Layer-3WMA Decode Compliant with Windows Media AudioWAV Decode Linear-PCMFLAC Decode FLAC file (Up to 48 kHz / 16 bit)AudioMaximum Output Power 50 W × 4Full Bandwidth Power 22 W × 4 (at less than 1 % THD)Speaker Impedance 4 Ω — 8 ΩTone Action Bass 100 Hz ±8 dBMiddle 1.0 kHz ±8 dBTreble 12.5 kHz ±8 dBPreout Level/Load (USB) 2 500 mV/10 kΩPreout Impedance ≤ 600 ΩAuxiliary Frequency Response (±3 dB) 20 Hz — 20 kHzInput Maximum Voltage 1 000 mVInput Impedance 30 kΩGeneral Operating Voltage 14.4 V (10.5 V — 16 V allowable)Maximum Current Consumption 10 AOperational Temperature Range –10°C — +60°CInstallation Size (W × H × D) 182 mm × 53 mm × 107 mmWeight 0.6 kgSubject to change without notice.libFLACCopyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh CoalsonRedistribution and use in source and binary forms, with or without modification, are permitted provided thatthe following conditions are met:- Redistributions of source code must retain the above copyright notice, this list of conditions and thefollowing disclaimer.- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and thefollowing disclaimer in the documentation and/or other materials provided with the distribution.- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse orpromote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND ONTRIBUTORS “AS IS” AND ANY EXPRESS ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION ORCONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIALDAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OFUSE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANYWAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.