Kenwood KMM-202 Instuction Manual

Contents

Kenwood KMM-202 Instuction Manual Manual pdf 19 page image

ENGLISH 17REMOTE CONTSTEERING WHEELREMOTE INPUTP. CONTANT CONTMUTEPart list forinstallation(A) FaceplateWiring connection(C) Mounting sleeve(B) Trim plate(D) Wiring harness(E) Extraction keyWhen connecting to anexternal amplifier, connectits ground wire to the car’schassis to avoid damagingthe unit.If your car does not have an ISO terminal :We recommend installing the unit with a commerciallyavailable custom wiring harness specific for your car andleave this job to professionals for your safety. Consult yourcar audio dealer.Fuse (10 A)Front/ Rear/ Subwoofer outputAntenna terminalLight blue/yellow(Steering remotecontrol wire)To the steering wheelremote control adapterBlue/White(Power controlwire/ Antennacontrol wire)Brown(Mute controlwire)To the power controlterminal when using theoptional power amplifieror to the antenna controlterminal in the vehicleTo the terminal thatis grounded when thetelephone rings or duringconversation ( 13)(To connect the Kenwoodnavigation system, refer yournavigations manual.)Yellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)Pin Color and functionA4 Yellow : BatteryA5 Blue/White : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 Purple ] : Rear speaker (right)B2 Purple/black [B3 Gray ] : Front speaker (right)B4 Gray/black [B5 White ] : Front speaker (left)B6 White/black [B7 Green ] : Rear speaker (left)B8 Green/black [ISO connectorsConnecting the ISO connectors on some VW/Audi orOpel (Vauxhall) automobilesYou may need to modify the wiring of the suppliedwiring harness as illustrated below.UnitVehicleA7 (Red) Ignition wire(Red)A4 (Yellow)Default wiringBattery wire(Yellow)If no connections are made, do not let the wire come outfrom the tab.