Kenwood KMR-330 Instruction Manual
Also see for KMR-350U: Instruction manualInstruction manualInstallation instructionsService manual
                                                        | |
Contents
|
14 | KMR-330Menu Glossary• SWPRE (Switching Preout)Switches the preout between rear output (“REAR”)and subwoofer output (“SUB-W”).• SUPREMETechnology to extrapolate and supplement withproprietary algorithm, the high-frequency rangethat is cut off when encoding at low bit rate (lessthan 128Kbps, Sampling frequency is 44.1kHz).Supplementing is optimized by compressionformat (AAC, MP3 or WMA) and processedaccording to bit rate.The effect is negligible with music that is encodedat high bit rate, variable bit rate or has minimal highfrequency range.• CD READSets the method for reading CD.When unable to play special format CD, set thisfunction to “2” to force playing. Note that somemusic CD may be unplayable even when set to “2”.In addition, audio files cannot be played when setto “2”. Normally, keep this set to “1”.1 : Automatically distinguishes between audio filedisc and music CD when playing disc.2 : Forces playing as music CD.• AUXWhen this is set to ON, AUX source can be selected.ON1: Outputs the sound of external unit connectedto the AUX terminal when switched to AUXsource.ON2: Activates the attenuator function whenswitched to AUX source.Turn off the attenuator function whenlistening to output from external unit. Thisprevents the noise when no external unit isconnected to AUX terminal.OFF: Disables the selection of AUX source.Set to OFF when not using the AUX terminal.• DISPLAYIf this unit is not operated at least 5 seconds with“OFF” selected, the display turns off. During a setupmode, the display will not turn off even if 5 secondslapse.FCC WARNINGThis equipment may generate or use radiofrequency energy. Changes or modifications to thisequipment may cause harmful interference unlessthe modifications are expressly approved in theinstruction manual. The user could lose the authorityto operate this equipment if an unauthorized changeor modification is made.NOTEThis equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment may cause harmful interference to radiocommunications, if it is not installed and used inaccordance with the instructions. However, thereis no guarantee that interference will not occur in aparticular installation. If this equipment does causeharmful interference to radio or television reception,which can be determined by turning the equipmentoff and on, the user is encouraged to try to correctthe interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipmentand receiver.• Connect the equipment into an outlet on acircuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TVtechnician for help.2CAUTIONUse of controls or adjustments or performance ofprocedures other than those specified herein mayresult in hazardous radiation exposure.In compliance with Federal Regulations, followingare reproductions of labels on, or inside the productrelating to laser product safety.Kenwood Corporation2967-3, ISHIKAWA-MACHI,HACHIOJI-SHITOKYO, JAPANKENWOOD CORP. CERTIFIES THIS EQUIPMENTCONFORMS TO DHHS REGULATIONS N0.21 CFR1040. 10, CHAPTER 1, SUBCHAPTER J.Location : Bottom PanelAppendix |
Related manuals for Kenwood KMR-350U
manualsdatabase
Your AI-powered manual search engine