Kenwood KOS-L432 Instruction Manual

Also see for KOS-L432: Product information Instruction manual Instruction manual

Contents

English | 9Troubleshooting GuideWhat might seem to be a malfunction in your unitmay just be the result of slight misoperation ormiswiring. Before calling service, first check thefollowing table for possible problems.? The power does not turn ON.✔ The monitor is not attached to the bracketsecurely.☞ Attach the motor to the bracket until it clicks.? Nothing happens when the buttons are pressed.✔ The computer chip in the unit is not functioningnormally.☞ Press the reset button on the unit (page 2).Monitor SectionScreen size: 4.3 inches wide95.0 (W) × 53.9 (H) mm3-6/8 (W) × 2-1/8 (H) inchesDisplay system: Transmissive with Micro Reflective type, VAmode LCD panelDrive system: TFT active matrix systemNumber of pixels: 391,680 pixels (480 H × 272 V × RGB)Effective pixels: 99.99%Pixel arrangement: RGB striped arrangementBack lighting: LEDVideo sectionColor System of External Video Input: NTSC/ PALAnalog RGB input: 0.7 Vp-p/ 75 ΩSpecifications subject to change without notice.GeneralOperating voltage: 14.4 V DC (11 – 16 V)Current consumption: 250 mAOperational temperature range: –10 °C to +60 °CStorage temperature range: –20 °C to +70 °CDimensions (W × H × D): 125 × 75 × 18.5 mm4-15/16 × 2-15/16 × 6/8 inchWeight: 150 g (0.33 lbs)SpecificationsAlthough the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or maylight incorrectly.⁄• Refer to the instruction manual of the connected A/Vcontroller for troubleshooting on the operation.130.com.uaAutogood products Internet store “130”

/ 10

Related manuals for Kenwood KOS-L432