KR-897/KR-797 (En)24To improve the feeling of presence in the surround modes,various parameters of each surround mode can be set upaccording to the speaker system used as well as to theenvironmental of the listening room. The following proce-dure let you set the parameters of the surround mode (DOLBYPRO LOGIC, DOLBY 3 STEREO).Once the settings have been done, it is held in memory so re-adjustment is not necessary even after the mode has beenchanged to other modes.: Keys or controls to be used in this operationSelect the DOLBY PRO LOGIC surround mode.12Adjust the front speaker balance.3PRO LOGICSelect the CENTER MODE.CENTERMODELights÷ Select a surround mode according to the played source and yoursystem components.Each press of CENTER MODE key switches the modes as follows:1 NORMAL : When the center speaker is a compactspeaker.2 WIDEBAND : When the center speaker is a large speaker.3 PHANTOM : When no center speaker is used.Adjustment procedure: Each press of the SETUP key switches theadjusted items as shown below.1 Press the SETUP key (on the remote con-trol unit).2 Adjust the front speaker (left & right)levels so that the left and right levels areidentical.3 Press the SETUP key again to establishthe setup.After this, the unit enters the conditionfor “4 Adjust the volume level of eachspeaker”.SETUPLEVELCONTROL3 Adjusting the front speaker balance4 Adjusting the volume level of each speaker5 Adjusting the delay timeEnd of setupTo cancel setup in the middle, press the SETUP key repeatedly until thesetup mode is cancelled.Adjustments for surround playPOWERPHONESON/STANDBYUPDOWN1 2 3 4 5 6 7 8 9 0AUTO DIRECT MEMORYPRO LOGICSTEREO SRS 3DN.B. SOURCEDIRECTP.CALL3 STEREOTUNING TAPE2MONITORPOWER1 2 34 5 67 8 9DISK SKIP0+10SOUNDCENTERMODEA/B +100TUNER CD PHONOVIDEO2 MUTE1 ¡7 6AV AUXREMOTE CONTROL UNITRC-R05054 ¢2AUTO BANDP.CALLVOLUMECONTROLSTANDBYSPEAKERSSRS3D SPEAKERSINPUT SELECTOR VOLUME CONTROL+10AUDIO-VIDEO SURROUND RECEIVER KR-897BAND DIMMERVIDEO1TAPE1SETUPTAPE2MONITORLEVELCONTROLLISTENMODESURROUNDP R O L O G I CCenter positionindicationSURROUND- - - y - -tRight speakerpositionLeft speakerpositionBalance setupTo decrease theleft channel soundTo decrease theright channel sound