Kenwood KRC-165 Instruction Manual

Also see for KRC-165: Service manual

Contents

English— 14 —InstallationRemoving the hard rubber frame■When the lower level is removed, remove the upper twolocations.2The frame can be removed from the top side in the samemanner.NOTECatchLockEngage the catch pins on the removal tool and remove the twolocks on the lower level.Lower the frame and pull it forward as shown in the figure.1Accessory2Removal toolRemoving the Unit■Lower the removal tooltoward the bottom, and pullout the unit halfway whilstpressing towards theinside.4Pull the unit all the way outwith your hands, beingcareful not to drop it.5Be careful to avoid injury from the catch pins on the removal tool.2CAUTIONCatch facing upRefer to the section “Removing the hard rubber frame” andthen remove the hard rubber frame.Remove the Hex-head screw with integral washer (M4×8) onthe back panel.Insert the two removal tools deeply into the slots on each side,as shown.321Accessory2Removal toolScrew (M4X8)(commerciallyavailable)

/ 16

Related manuals for Kenwood KRC-165