Kenwood KRC-21SA Instruction Manual

Also see for KRC-21SA: Instruction manual Service manual

Contents

English— 14 —— 14 —■ Removing the hard rubber frame2 When the lower level is removed, remove the upper twolocations.The frame can be removed from the top side in the same manner.CatchLock1 Engage the catch pins on the removal tool and remove the twolocks on the lower level.Lower the frame and pull it forward as shown in the figure.■ Removing the Unit4 Lower the removal tooltoward the bottom, and pullout the unit halfway whilepressing towards the inside.5 Pull the unit all the way outwith your hands, beingcareful not to drop it.Be careful to avoid injury from the catch pins on the removal tool.1 Refer to the section “Removing the hard rubber frame” and thenremove the hard rubber frame.2 Remove the screw (M4×8) on the back panel.3 Insert the two removal tools deeply into the slots on each side,as shown.Accessory2 Removal toolAccessory2 Removal toolScrew (M4X8)(commerciallyavailable)Installation