Kenwood KRC-225 Instruction Manual

Also see for KRC-225: Nstruction manual Service manual Instruction manual

Contents

Temporarily have reception switched from stereo to mono toreduce multi-path noise when listening to the FM station.Press the [CRSC] button for at least 1 second.Each time the button is pressed CRSC turns ON or OFF.When it's ON, the " "(CRSC) indicator is ON.CRSC (Clean Reception System Circuit)2 Call up the stationPress the [#1] — [#6] button.Calling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.Preset TuningPutting stations with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put in the memory.Auto Memory Entry closes.Auto Memory EntryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the [#1] — [#6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [#1]— [#6] button.Station Preset Memory— 9 —