Kenwood KRC-266 Instruction Manual

Also see for KRC-266: Service manual

Contents

Changing the tuning frequency step.The original setting is FM band 50 kHz, and AM band 9 kHz.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [#1] and [#5] button, press the [SRC]button.The frequency step changes to FM band 200 kHz, and AM band10 kHz.• When the same operation is repeated, it returns to the originalsetting.• When the frequency step is switched, the frequencies in thememory are deleted.Frequency Step SettingTemporarily have reception switched from stereo to mono toreduce multi-path noise when listening to the FM station.Press the [CRSC] button for at least 1 second.Each time the button is pressed CRSC turns ON or OFF.When it's ON, the " "(CRSC) indicator is ON.CRSC (Clean Reception System Circuit)2 Call up the stationPress the [#1] — [#6] button.Calling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.Preset TuningPutting stations with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put in the memoryAuto Memory Entry closes.Auto Memory EntryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the [#1] — [#6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [#1]— [#6] button.Station Preset Memory— 9 —