Kenwood KRC-291 Instruction Manual

Also see for KRC-16: Instruction manual Instruction manual

1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [AUD] button.3 Select the Audio item for adjustmentPress the [FM] or [AM] button.Audio Control2 Enter Control modePress the [AUD] button.3 Select the Audio item for adjustmentPress the [FM] or [AM] button.Select the "DB " display.4 Select the Sound typePress the [#1] — [#5] button.Press button Sound setting Display[#1] Flat "DB FLAT"[#2] Rock "DB ROCK"[#3] Pops "DB POPS"[#4] Jazz "DB JAZZ"[#5] Easy "DB EASY"When the dB(Sound Coordinate) setting is changed, the Bass andTreble set in audio control replace the dB(Sound Coordinate) values.5 Exit Control modePress the [AUD] button.Compensating for low and high tones during low volume.Press the [LOUD] button for at least 1 second.Each time the button is pressed for at least 1 second theLoudness turns ON or OFF.When it’s ON, "LOUD" indicator is ON.LoudnessPress the [SRC] button.Source required DisplayTuner "TUNER"Tape "TAPE"External disc (KRC-291/ 26 only) "DISC"Standby (Illumination only mode) "ALL OFF"This unit automatically turns full power OFF after 20 minutes lapsesin Standby mode in order to save the vehicles battery.The time until full power OFF can be set in (page 18).Selecting the SourceGeneral features— 6 —EnglishYou can recall the best sound setting preset for different types ofthe music.1 Select the source to setPress the [SRC] button.dB (Sound Coordinate)