— 25 —nit mayiring.tablee fuse withable.cancel thein thisnected tosource.emovinginal.✔ The ignition and battery wire are incorrectly connected.11☞ Connect the wire correctly, referring to the section on.? The TEL mute function does not work.15✔ The TEL mute wire is not connected properly.☞ Connect the wire correctly, referring to the section on.? The TEL mute function turns ON even though the TEL mute wire isnot connected.16✔ The TEL mute wire is touching a metal part of the car.☞ Pull the TEL mute wire away from the metal part of the car.? Even if Loudness is turned ON, high-pitched tone isn't compensatedfor. 17✔ Tuner source is selected.☞ High-pitched tone isn't compensated for when in Tuner source.? No sound can be heard, or the volume is low.✔ The fader or balance settings are set all the way to one side.21☞ Center the fader and balance settings.✔ The input/output wires or wiring harness are connected incorrectly.22☞ Reconnect the input/output wires or the wiring harness correctly.See the section on "Connecting Wires to Terminals".✔ The cassette tape is bad.23☞ Try playing another cassette tape. If works fine, the first tape wasbad.? The sound quality is poor or distorted.25✔ One of the speaker wires is being pinched by a screw in the car.☞ Check the speaker wiring.✔ The tape head is dirty.26☞ Clean the tape head.✔ The speakers are not wired correctly.27☞ Reconnect the speaker wires so that each output terminal isconnected to a different speaker.? The Touch Sensor Tone doesn’t sound.34✔ The preout jack is being used.☞ The Touch Sensor Tone can’t be output from the preout jack.