Kenwood KRC-430 Instruction Manual

Also see for KRC-430: Instruction manual Instruction manual

ACCESSORIES AND INSTALLATION@ ACCESSORIESDetachable caseMetal mounting strapHex. bolt {M5 x 20)Hex. nut (M5)@ INSTALLATION1 Before installation and wiring, remove the © terminal of the battery to prevent short-circuiting. Connect the tnput and output cords of the system._ Connect the ground to the metal chassis of the car.Connect the memory backup lead (yellow).Connect the power supply lead (red).Install the set and after confirming the installation and wirings are correct, connectine — terminal of tne battery.OObhWAYe lf a fuse is blown, first check that the associated wires are not short-circuited thenreplace the fuse with a new one having the same capacity.Secure unconnected wires properly so that they do not contact the vehicle chassis.Do not remove the caps attached to the unused terminals.As the unit uses BTL output, always connect the without stripe speaker wires to the= terminals of the speaker systems. Never let the © speaker wires touch and neverconnect them to the chassis (ground). Do not let the speaker terminals come intocontact with the chassis (ground). Insulate any unused output wire to prevent a shortCircuit.