Kenwood KRC-594 Service Manual

Also see for KRC-594: Instruction manual Instruction manual

Contents

KRC-594/V/Y/YV9TEST MODE11. Special display when the display is All ONPressing the Preset keys while the power is All OFFdisplays the following information.[14seg 8 digits][15x7dot 12 digits]12. Other specifications• The line mute against times are 1 second from 10 secondswhen starting the test mode. Security• Forced Power ON mode (All models)Even when the security is approved, resetting the unitwhile holding the Q and 4 keys makes it possible to turnthe power ON for 30 minutes.After 30 minutes haveelapsed, it is not possible to return to the previous con-dition unless the unit is reset again.• Method of registration of the security code afterEEPROM (F/E) replacement (Code security model)1. Enter the test mode. (See How to enter the test mode)2. Press the MENU key to enter the MENU.3. When the message "Security" is displayed,press andhold the Track Up/Down key for 1second to enter theSecurity registration mode.4. Enter the code using the FM /AM /Track Down keys.• FM key : Number up• AM key : Number down• Track Up key:Cursor right shift• Track Down key :Cursor left shift5. Hold down the Track Up key for at least 3 seconds andthe message, "RE-ENTER" appears, so once againenter the code according to Step 4 above.6. Press and hold the Track Up key for 3 seconds until"AP-PROVED" is displayed.7. Exit from the test mode. (See 2 How to exit from thetest mode)(Note) All Clear is not applicable to the security codeof this model.• Simplified method of clearing the security code1. While the code entry is requested, press and hold theTrack Up key for 3 seconds while holding the AUTOkey pressed. (----will dissappear.)2. Enter "KCAR" from the remote.• Press the 5 key on the remote twice, then press theTrack Up key. (This enters "K")• Press the 2 key on the remote 3 times, then press theTrack Up key. (This enters "C")• Press the 2 key on the remote once, then press theTrack Up key. (This enters "A")• Press the 7 key on the remote twice, then press theTrack Up key. (This enters "R")3. Security function is canceled and the unit enters the AllOFF mode.4. If you commit a mistake in the code entry, the unitenters the code request mode.Version display(8 digits, Month/Day/Hour/Minute)(Display)xxxxxxxxShort press: View power ON time.(The All OFFperiod is not counted.)Long press/hold: Clear power ON time.(Display)PONxxxxx Max. 65535 (hours)Short press: Display TAPE operation time.Long press/hold: Clear TAPE operation time.(Display)TPTxxxxx Max. 65535 (hours)Short press: Display TAPE ejection count.Long press/hold: Clear TAPE ejection count.(Display)EJCxxxxx Max. 65535 (times)Short press: Display Panel open/close count.Long press/hold: Clear Panel open/close count.(Display)PCxxxxx Max. 655359 (times)Display ROM colection version(Display)ROM Rxxx Invalid :ROM R–1key2key3key4key5key6keyFM keyVersion display(8 digits, Month/Day/Hour/Minute)(Display)SYS_xxxxxxxxShort press: View power ON time.(The All OFFperiod is not counted.)Long press/hold: Clear power ON time.(Display)PonTim_xxxxx Max. 65535 (hours)Short press: Display TAPE operation time.Long press/hold: Clear TAPE operation time.(Display)TPTim_xxxxx Max. 65535 (hours)Short press: Display TAPE ejection count.Long press/hold: Clear TAPE ejection count.(Display)EjeCnt_xxxxx Max. 65535(times)Short press: Display Panel open/close count.Long press/hold: Clear Panel open/close count.(Display)PnCnt_xxxxxx Max. 655359 (times)Display ROM colection version(Display)ROM Rxxx Invalid :ROM R–1key2key3key4key5key6keyFM key