Kenwood KRC-603C Instruction Manual

Also see for KRC-403: Instruction manual Instruction manual Instruction manual

The following messages are displayed when certain problems are occurring in your system. Take the recommendedactions.EJECTNO DISCE-04BLANKNO TRACKE-77E-99HOLDanNo disc magazine has been loaded in the changer. The disc magazine is not completely loaded.= Load the disc Magazine properlyNo disc has been loaded in the disc magazine.Load a disc into the disc magazineNo disc has been loaded in the disc magazine.Load a disc into the disc magazine.The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.Clean the CD and load tt correctly.Nothing has been recorded on the MD.The next MD will automatically be played.No tracks are recorded on the MD, although it has a title.The next MD will automatically be played.The unit ts malfunctioning for some reason.Press the reset button on the unit. If the "E- 77", "E- 99” code does not disappear, consult your nearest service center.The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping alloperation.Cool down the unit by opening the windows or turning on the air conditioner. As the temperature fails below 60°C (140°F), thedisc will start playing again.If this indicator continues blinking, it is possible that the tape has become jammed or tangled.Contact the Kenwood dealer if the cassette tape cannot be ejected.29

/ 30

Related manuals for Kenwood KRC-403