Kenwood KRC-665 Instruction Manual

Also see for KRC-665: Service manual

Changing the tuning frequency step.The original setting is FM band 50 kHz, and AM band 9 kHz.While pressing the [#1] and [#5] button, press the Resetbutton.The frequency step changes to FM band 200 kHz, and AM band10 kHz.• When the same operation is repeated, it returns to the originalsetting.• When the frequency step is switched, the frequencies in thememory are deleted.Frequency Step SettingCalling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.2 Call up the stationPress the [#1] — [#6] button.Preset TuningPutting stations with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put in the memoryAuto Memory Entry closes.Auto Memory EntryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the [#1] — [#6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [#1]— [#6] button.Station Preset MemoryEntering the frequency and tuning.1 Select the bandPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remote."– – – –" is displayed.3 Enter the frequencyPress the number buttons on the remote.Example:Desired frequency Press button92.1 MHz (FM) [#0], [#9], [#2], [#1]810 kHz (AM) [#0], [#8], [#1], [#0]Canceling Direct Access TuningPress the [DIRECT] button on the remote.Direct Access Tuning (Function of remote)Function of the KRC-765/KRC-665Tuner features— 16 —English