Kenwood KRC-666 Instruction Manual

Also see for KRC-666: Service manual

— 39 —Cassette tape source? Can’t remove tape.44✔ The cause is that more than 10 minutes has elapsed since the vehicleACC switch was turned OFF.☞ The tape can only be removed within 10 minutes of the ACCswitch being turned OFF. If more than 10 minutes has elapsed,turn the ACC switch ON again and press the Eject button.? The DPSS and Music Repeat don’t operate correctly.45✔ The space between the songs on the tape can’t be recognizedbecause it’s too short.☞ Have at least 4 seconds between songs.✔ The space between songs can’t be recognized because there’s toomuch noise between songs.46☞ Reduce the noise between songs.? The blank skip doesn’t work.47✔ Because noise is too loud, the non-recorded part can’t be recognized.☞ Reduce the noise between songs.? Blank Skip functions at places that are recorded.48✔ Because the recording level is low, it’s recognized as not recorded.☞ Turn Blank Skip OFF.? (page 19) is cancelled arbitrarily.✔ The power was turned OFF or a source selection or other operationwas performed.☞ Music repeat is cancelled when the power is turned OFF or asource selection or other operation is performed.Disc source? "AUX1" is displayed without achieving External disc control mode.50✔ Unsupported disc changer is connected.51☞ Use the disc changer mentioned in the IMPORTANTINFORMATION of the section on (page 3).? The specified disc does not play, but another one plays instead.52✔ The specified CD is quite dirty.☞ Clean the CD.✔ The disc is loaded in a different slot from that specified.54☞ Eject the disc magazine and check the number for the specifieddisc.✔ The disc is severely scratched.55☞ Try another disc instead.? Direct Search can’t be done.66-1✔ Another function is ON.☞ Turn Random Play or other functions OFF.? Track Search can't be done.66-2✔ For the discs/folders first or last song.☞ For each disc/folder, Track Search can't be done in the backwarddirection for the first song or in the forward direction for the lastsong.If the following situations, consult your nearest servicecenter:Even though the disc changer is connected, the Disc Changer source is notON, with "AUX1" showing in the display during the Changer Mode.

/ 42

Related manuals for Kenwood KRC-666