Kenwood KRC-777R Instruction Manual

Contents

procedure in step 4.Hold down the transmit button on the Mask key again until thefull transmit level indicator lights up in the display."APPROVED" will appear in the display, with the Mask keyfunction turning on.If you press the RESET button or remove the battery:The first time you turn the unit on again, “TRANSMIT 1” willappear in the display, indicating the setting mode has beenentered. Repeat steps 4 and 5 above, and transmit the signal.You can start operating the unit again when "APPROVED"appears in the display.5If you have transmitted the Mask Key's signal once to the unitin advance, you will have to transmit it once again if the unithas been removed from the battery. This function helps preventtheft.When using the unit for the first time:In order to deactivate the demonstration mode, be sure topress the transmit button to transmit the Mask Key's signal.If this procedure is not carried out, the control panel of the unitwill re-open in two seconds even with your vehicle's ignitionturned off.Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the "Mask key" appears inthe display.Press the 4 button to search in the other direction.Hold down either the AM or FM button for two seconds ormore."TRANSMIT 1" will appear in the display, indicating the settingmode has been entered.Hold down the transmit button on the Mask key until the fulltransmit level indicator lights up in the display."TRANSMIT 2" will be displayed.• Keep the Mask Key close to the signal sensor when youtransmit the Mask Key’s signal.• If the Mask Key’s signal does not be received correctly, thedisplay will return to “TRANSMIT 1”. In this case, repeat theNOTETransmit buttonTransmission part4321Mask Key— 31 —