Kenwood KRC-V879R Instruction Manual

Also see for KRC-779R: Service manual

Contents

Selecting AUX-name displayHolding down the DISP button for two seconds or more duringthe AUX mode, AUX-name display is blinked for AUX-nameselection mode.Pressing 4 or ¢ button during this mode allows you to select"AUX" , "TV" , "VCP" , "GAME" or "PORTABLE" in the AUX mode.The AUX-name selection mode can be exited by pressing theDISP button or doing nothing for 10 seconds.• ATT buttonTurns down the volume quickly. To return the volume to itsoriginal level, press the button again. Turning the volume up, orturning it all the way down deactivates the attenuator function.NOTE• VOL buttonsPress the 5 button to turn the volume up.Press the ∞ button to turn the volume down.• SRC buttonEach time you press the SRC button, the mode switches asfollows:• The mode switches to the next mode from any mode whichcannot be used.• The external disc control mode will differ depending on the unitthat is connected.• To enable the selection of External disc control mode 2/AUXmode, you should connect optional switching adapter KCA-S210A (which allows you to select both External disc controlmode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) orswitching adapter CA-C1AX (which allows you to select AUXmode only).During the AUX mode, "AUX" (or AUX-name display) will showin the display. When the CA-C1AX is being used, the AUX Modewill replace the External Disc Control Mode.• If you have selected Standby mode, the timer function thatturns the power off automatically will be activated.To find out how to set the time on the timer, and how to cancelthe timer function, refer to the section on the Power OFF Timerfunction under Menu settings (page 36).NOTEtTuner modetTape modetExternal disc control mode 1tExternal disc control mode 2 / AUX modetStandby modeBasic operationsAccessory of the KRC-V879RBasic Operations of remote control— 38 —English• 4/¢ buttonsPress the 4 button to make decreasing seeks (using thepreset tuning mode).Press the ¢ button to make increasing seeks (using the presettuning mode).Use to move the cursor left or right during station name input.• AM/FM buttonsPress the AM button to select the MW and LW bands.Press the FM button to select and switch between FM1, FM2,and FM3 bands.• DIRECT/OK buttonEnters and cancells the Direct access tuning mode.• 38 buttonEnters and cancells the Programme Type Selection (PTY) mode.• Number/letter entry buttonsPress buttons #1-6 to recall preset stations.Use to enter frequency of the desired station during Directaccess tuning mode.Tuner features