Kenwood KRF-V4080D-S Service Manual

Also see for krf v5080d: Instruction manual Instruction manual Instruction manual

Contents

KRF-V4080D/V5080D/V5580D-S/V6080D/VR-804-S/80640KRF-V5080D/KRF-V6080DAUDIO section (For Europe)Rated power output during STEREO operationDIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 Ω)............................................................................... 100 W + 100 WEffective power output during SURROUND operationTotal harmonic distortion .............................. 0.05 % (1 kHz, 50 W, 6 Ω)Frequency response (IHF’66)CD/DVD ....................................... 20 Hz ~ 70 kHz, 0 dB ~ -3.0 dBMaximum input levelPHONO (MM) ................................ 40 mV, 1.0 % T.H.D. at 1 kHzSignal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 74 dBCD/DVD, TAPE, VIDEO 1, VIDEO 2, DVD/6CH .................. 95 dBLoudness controlVOLUME at -30 dB level .......................................+8 dB (100 Hz)Input sensitivity / impedancePHONO (MM) .......................................................... 7.5 mV / 27 kΩCD/DVD, TAPE, VIDEO 1, VIDEO 2 ..................... 550 mV / 47 kΩDVD/6CH INPUT .................................................... 550 mV / 15 kΩOutput level / impedanceTAPE REC.................................................................550 mV / 1 k ΩPRE OUT (SUBWOOFER) .........................................1.5 V / 2.2 kΩPRE OUT (SURROUND BACK) .................................1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE............................................................ ±10 dB (at 10 kHz)AUDIO section (For other countries)Rated power output during STEREO operationEffective power output during SURROUND operationTotal harmonic distortion ............................... 0.05% (1 kHz, 50 W, 8 Ω)Frequency responseCD/DVD ......................................... 20 Hz ~ 70 kHz, 0 dB, -3.0 dBSignal to noise ratio (IHF’66)CD/DVD, AUX, TAPE, VIDEO 1, VIDEO 2 .......................... 95 dBInput sensitivity / impedanceCD/DVD ..................................................................550 mV / 47 kΩDVD/6CH INPUT ................................................... 550 mV / 15 kΩOutput level / impedanceTAPE REC.................................................................550 mV / 1 kΩPRE OUT (SUBWOOFER) ........................................1.5 V / 2.2 kΩPRE OUT (SURROUND BACK)(KRF-V6080D) .........1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ......................................+8 dB (at 100 Hz)100 watts per channel minimum RMS, both channels driven, at 8 Ω from40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ............................... (-15 dBm ~ -21 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩVIDEO section (For Europe)VIDEO inputs / outputsVIDEO (composite) .................................................... 1 Vp-p / 75 ΩS-VIDEO inputs /outputs(KRF-V6080D)S-VIDEO (luminance signal) ......................................1 Vp-p / 75 ΩS-VIDEO (chrominance signal) .......................... 0.286 Vp-p / 75 ΩCOMPONENT VIDEO inputs /outputs(KRF-V6080D)COMPONENT VIDEO (luminance signal) .................1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/CR-signal) .............. ±0.32 Vp-p / 75 ΩVIDEO section (For other countries)VIDEO inputs / outputsVIDEO (composite) .................................................... 1 Vp-p / 75 ΩS-VIDEO inputs / outputsS-VIDEO (luminance signal) ......................................1 Vp-p / 75 ΩS-VIDEO (chrominance signal) .......................... 0.286 Vp-p / 75 ΩCOMPONENT VIDEO inputs / outputs (KRF-V6080D)(KRF-V5080D:except for the Australia)COMPONENT VIDEO (luminance signal) .................1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/CR-signal) ............ ±0.32 Vp-p / 75 ΩFM tuner section (For Europe)Tuning frequency range ................................... 87.5 MHz ~ 108.0 MHzUsable sensitivity (DIN at 75 Ω)MONO ..................... 1.3 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)STEREO.................. 45 μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)Total harmonic distortion (DIN at 1 kHz)MONO .......................................................... 0.2% (71.2 dBf input)STEREO...................................................... 0.8% (71.2 dBf input)Signal to noise ratio (DIN weighted at 1 kHz)MONO ................................. 65 dB (40 kHz DEV., 71.2 dBf input)STEREO.............................. 60 dB (46 kHz DEV., 71.2 dBf input)Stereo separation (DIN 1 kHz) ......................................................36 dBSelectivity (±300 kHz) .................................................................... 64 dBFrequency response (30 Hz ~ 15 kHz) ...................... +0.5 dB, -3.0 dBFM tuner section (For other countries)Tuning frequency range ....................................87.5 MHz ~ 108.0 MHzUsable sensitivity (MONO) ......1.6 μV (75 Ω)/ 15.2 dBf (75 kHz DEV.,SINAD 30 dB)50dB quieting sensitivitySTEREO..................................................... 28 μV (75 Ω)/ 40.2 dBfTotal harmonic distortion (1 kHz)MONO .......................................................... 0.5% (71.2 dBf input)STEREO...................................................... 0.7% (71.2 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO ........................................................ 75 dB (71.2 dBf input)STEREO..................................................... 68 dB (71.2 dBf input)Stereo separation (1 kHz) .............................................................40 dBSelectivity (±400 kHz) ....................................................................50 dBFrequency response ...................... (30 Hz ~ 15kHz), +0.5 dB, -3.0 dBAM tuner section (For Europe)Tuning frequency range ...................................... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod, S/N 20 dB) ............. 16 μV / (600 μV/m)Signal to noise ratio (30% mod, 400 Hz).................................................................. 50 dB (60 dBμV EMF input)AM tuner section (For other countries)Tuning frequency range10 kHz step .................................................... 530 kHz ~ 1,610 kHz9 kHz step ...................................................... 531 kHz ~ 1,602 kHzUsable sensitivity ....................................................16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input) ............................... 50 dBGENERALPower consumption....................................................................... 280 WAC outletSWITCHED ........................................................ (total 90 W max.)Dimensions .................................................... W: 440 mm (17-5/16")H : 143 mm (5-5/8")D : 303 mm (11-15/16")Weight (Net)(for the Australia and Europe) ............................... 7.8kg (17.2 lb)(for other countries) ................................................ 8.8kg (19.4 lb)FRONT(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven).....100 W + 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven).....120 W + 120 WCENTER(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven).................100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven)..................120 WSURROUND(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven).....100 W + 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven).....120 W + 120 WSURROUND BACK (KRF-V6080D)(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)..................100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven)...................120 WFRONT(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)....100 W + 100 W(1 kHz, 10% T.H.D. at 8 Ω one channel driven).....120 W + 120 WCENTER(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)...................100 W(1 kHz, 10% T.H.D. at 8 Ω one channel driven)....................120 WSURROUND(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven).....100 W + 100 W(1 kHz, 10% T.H.D. at 8 Ω one channel driven)......120 W + 120 WSURROUND BACK (KRF-V6080D)(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)....................100 W(1 kHz, 10% T.H.D. at 8 Ω one channel driven).....................120 WSPECIFICATIONSwww . xiaoyu163. comQQ 376315150 992894298TEL 13942296513 992894298051513673QQTEL 13942296513 QQ 376315150 892498299TEL 13942296513 QQ 376315150 892498299

/ 31

Related manuals for Kenwood krf v5080d