Kenwood KRF-V4530D Service Manual

Also see for KRF-V4530D: Instruction manual Instruction manual Instruction manual Instruction manual Service manual

Contents

Kenwood KRF-V4530D Service Manual Manual pdf 2 page image

This manual is divided into four sections, Preparations, Operations,Other, and Remote Control.Remote Control (Separate booklet) (VR-407/VR-406/KRF-V7030D/KRF-V6030D only)Includes the “Quick Start Guide,” which shows you how to operate othercomponents using the remote control, as well as a detailed explanationof all remote control operations. Once you have registered your compo-nents with the proper setup codes, you’ll be able to operate both thisreceiver and your other AV components (TV, VCR, DVD player, LD pla-yer, CD player, etc.) using the remote control supplied with this receiver.The manual covers the VR-407, VR-406, VR-405, VR-414, KRF-V7030D, KRF-V6030D, KRF-V5030D, and KRF-V4530D. Items suchas functions, number of jacks, and remote control details differ some-what between these models. To confirm the functions available on themodel you have purchased, refer to the table below.Model name Remote TerminalControl Speaker out VIDEO 3 jacks Front inputVR-407 RC-R0609 2 systems Equipped EquippedKRF-V7030D (A, B)VR-406 RC-R0609 2 systems Not equipped Not equippedKRF-V6030D (A, B)VR-405/414 RC-R0509 1 system Not equipped Not equippedKRF-V5030D/V4530DMemory back up functionPlease note that the following items will be deleted from the unit'smemory if the power cord is disconnected from the AC outlet forapproximately 3 days.• Power mode.• Input selector settings.• Device preset.• Picture output.• Speaker ON/OFF• Volume level.• BASS, TREBLE, INPUT level.• Subwoofer ON/OFF.• Dimmer level.• Monitor ON/OFF.• MD/TAPE settings.• 6CH/2CH input setting.• Listen mode setting.• Speaker settings.• Input mode setting.• Midnight mode setting.• Broadcast band.• Frequency setting.• Preset stations.• Tuning mode.VIDEO 2/MONITOR jacks (for VR-406/405/414/KRF-V6030D/V5030D/V4530D)The receiver’s VIDEO 2/MONITOR jacks can be used in two differentways. Make the appropriate setting for the component connected tothe jack when the receiver is turned on.Use as a VIDEO 2 jackYou can connect a video deck or the like to these jacks and performvideo playback and recording. The initial factory setting is “VIDEO 2”.Use as a MONITOR jackYou can connect a cassette deck or the like to these jacks and makeuse of the deck’s monitoring function during recording. Alternately,you can connect a graphic equalizer to these jacks to apply compen-sation to the music signal.To use the VIDEO 2/MONITOR jacks as MONITOR jacks, hold downthe MONITOR key of the main unit for more two seconds so that theindication shown below appears.• At the same time the setting is switched to “MONITOR,” the audioinput source switches to tuner and the video input source switchesto VIDEO 1.• To switch the setting back to “VIDEO 2,” once again hold down theMONITOR key for two seconds or more.TUNEDAUTOFMMHzAMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTDSPAUTO SOUNDLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSSTEREO ST.MEMOSWRLSP AMONITORMONITORResetting the MicrocomputerIf the microcomputer may malfunction (unit cannot be operated,or shows an erroneous display) if the power cord is unpluggedwhile the power is ON, or due to some other external factor. If thishappens, execute the following procedure to reset the micro-computer and return the unit to its normal operating condition.Unplug the power cord from the wall outlet, then plug itback in while holding down the POWER key.• Please note that resetting the microcomputer will clear the contentsof the memory and returns the unit to the state it was in when it leftthe factory.With the power cord plugged in, turn the POWER keyOFF. Then, while holding down the ON/STANDBY key,press POWER.For U.S.A. and CanadaFor other countriesMODEL ABB POWER SUPPLY POWER AMP PREAMP DISPLAYKRF-V4530DE4 - X07-3142-71 X08-3010-11 X14-7122-72KRF-V5030DE1 - X07-3142-71 X08-3010-11 X14-7122-72KRF-V5030DT5 - X07-3140-51 X08-3010-11 X14-7122-72KRF-V5030DY5 X00-3000-20 X07-3142-91 X08-3010-11 X14-7120-22KRF-V5030D-SE3 - X07-3142-71 X08-3010-11 X14-7122-72KRF-V5030D-SI5 X00-3000-20 X07-3140-21 X08-3010-11 X14-7120-22KRF-V5030D-SM5 X00-3000-20 X07-3140-21 X08-3010-21 X14-7120-22KRF-V5030D-SX5 - X07-3140-71 X08-3010-11 X14-7120-72KRF-V5030DEE2 - X07-3142-71 X08-3010-11 X14-7122-72VR-405K5 - X07-3140-10 X08-3010-10 X14-7120-11VR-405P5 - X07-3140-10 X08-3010-10 X14-7120-11VR-414K4 - X07-3140-11 X08-3010-10 X14-7120-11VR-414P4 - X07-3140-11 X08-3010-10 X14-7120-11KRF-V6030DE6 - X07-3132-72 X08-3010-10 X14-7122-71KRF-V6030D-SI6 X00-3000-20 X07-3130-22 X08-3010-10 X14-7120-21KRF-V6030D-SM6 X00-3000-20 X07-3130-22 X08-3010-21 X14-7120-21KRF-V6030D-SX6 - X07-3130-72 X08-3010-10 X14-7120-71KRF-V6030DEE7 - X07-3132-72 X08-3010-10 X14-7122-71VR-406K6 - X07-3130-11 X08-3010-10 X14-7120-10VR-406P6 - X07-3130-11 X08-3010-10 X14-7120-10Model vs PCBKRF-V4530D/V5030D/V6030D/VR-405/406/4142CONTENTS / ACCESSORIES /CAUTIONSCONTENTS / ACCESSORIES / CAUTIONS............. 2CONTORLS ................................................................3BLOCK DIAGRAM ......................................................5CIRCUIT DESCRIPTION ............................................6ADJUSTMENT ............................................................8SCHEMATIC DIAGRAM .......................................... 17EXPLODED VIEW ....................................................33PARTS LIST..............................................................34SPECIFICATIONS ....................................................46ContentsCautionsFM indoor antenna (1)(T90-0836-05)For VR-406 and KRF-V6030D For VR-405, VR-414, KRF-V5030D, and KRF-V4530DRemote control unit (1)(A70-1330-05): RC-R0609(A70-1331-05): RC-R0610(E type)Batteries (R6/AA) (2) Remote control unit (1)(A70-1328-05): RC-R0509(A70-1329-05): RC-R0510(E,T type)*AC plug adaptor (1)(E03-0115-05)*Use to adapt the plug on the powercord to the shape of the wall outlet.(Accessory only for regions whereuse is necessary.)Batteries (R6/AA) (2)AM loop antenna (1)(T90-0852-05)Battery cover (A09-1178-08) Battery cover (A09-1178-08)AccessoriesCopy frominstructionmanual.