Kenwood KRF-V5010 Service Manual

Also see for VR-205: Connection guide Instruction manual Instruction manual Instruction manual

Contents

Kenwood KRF-V5010 Service Manual Manual pdf 37 page image

KRF-V5010/V6010/V7010/VR-205/206/207/255/25747SPECIFICATIONSNotes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).For U.S.A and CanadaAUDIO sectionRated power output during STEREO operationVR-207, VR-257, VR-206100 watts per channel minimum RMS, both channels driven, at8 Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonicdistortion.(FTC)VR-205, VR-25550 watts per channel minimum RMS, both channels driven, at8 Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonicdistortion.(FTC)Effective power output during SURROUND operationVR-207, VR-257, VR-206FRONT (1kHz, 0.7% T.H.D. at 8 Ω one channel driven).............................................................................. 100 W + 100 WCENTER (1kHz, 0.7% T.H.D. at 8 Ω one channel driven)............................................................................................. 100 WSURROUND (1kHz, 0.7% T.H.D. at 8 Ω one channel driven).............................................................................. 100 W + 100 WVR-205, VR-255FRONT (1kHz, 0.7% T.H.D. at 8 Ω one channel driven).................................................................................. 50 W + 50 WCENTER (1kHz, 0.7% T.H.D. at 8 Ω one channel driven)............................................................................................... 50 WSURROUND (1kHz, 0.7% T.H.D. at 8 Ω one channel driven).................................................................................. 50 W + 50 WTotal harmonic distortionVR-207, VR-257, VR-206 ...................... 0.03% (1 kHz, 50W, 8 Ω)VR-205, VR-255 ..................................... 0.03% (1 kHz, 25W, 8 Ω)Signal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 75 dBCD ......................................................................................... 91 dBInput sensitivity / impedancePHONO (MM) ......................................................... 2.5 mV / 27 kΩCD ......................................................................... 200 mV / 47 kΩDVD 6CH (SUBWOOFER) ................................... 200 mV / 10 kΩOutput level / impedanceTAPE REC .............................................................. 200 mV / 1 kΩPRE OUT (CENTER, SURROUND) .............................. 1 V / 1 kΩ(only VR-207, VR-257, VR-206)PRE OUT (SUBWOOFER) .......................................... 1 V / 600 ΩTone controlBASS .............................................................. ±10 dB (at 100 Hz)TREBLE .......................................................... ±10 dB (at 10 kHz)VIDEO sectionVIDEO inputs / outputsVIDEO (composite) ............................................ 1 Vp-p / 75 ΩTV tuner section (For VR-257)Reception frequency ................................................ 65.75 MHz (3ch)71.75 MHz (4ch)FM tuner sectionTuning frequency range ................................... 87.5 MHz ~ 108 MHzUsable sensitivity (MONO)................ 1.6 μV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)50dB quieting sensitivitySTEREO ................................................ 31.6 μV (75 Ω)/ 41.2 dBfTotal harmonic distortion (1 kHz)MONO ............................................................ 0.6% (65 dBf input)STEREO ........................................................ 0.7% (65 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO .......................................................... 75 dB (65 dBf input)STEREO ...................................................... 68 dB (65 dBf input)Stereo separation (1 kHz) .......................................................... 38 dBSelectivity (±400 kHz) ................................................................. 70 dBFrequency response .................... 30 Hz ~ 15kHz, +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range10 kHz step ................................................. 530 kHz ~ 1,700 kHzUsable sensitivity (30% mod., S/N 20 dB)........................................................................ 16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input) ........................... 50 dBGENERALPower consumption .................................................................... 2.2 AAC outletSWITCHED ..................................... 2 (total 150 W, 1.25 A max.)Dimensions ..................................................... W : 440 mm (17-5/16")H : 144 mm (5-11/16")D : 390 mm (15-3/8")Weight (Net)VR-207, VR-257, VR-206 ..................................... 8.6 kg (19.0 lb)VR-205, VR-255 .................................................... 8.2 kg (18.1 lb)www. xiaoyu163. comQQ 376315150 992894298TEL 13942296513 992894298051513673QQTEL 13942296513 QQ 376315150 892498299TEL 13942296513 QQ 376315150 892498299

/ 40

Related manuals for Kenwood VR-205