Kenwood KRF-V5100D Instruction Manual

Also see for KRF-V5100D: Service manual

6 ENNames and functions of partsMain unitStandby modeWhile the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under thecondition, the system can be turned ON by the remote control unit.DisplayBand indicatorsFrequency display,Input display,Preset channel display,Surround mode displaySpeaker indicatorPRO LOGICindicatorAUTO DETECTindicatorDOLBY DIGITALindicatorDTS indicatorCLIP indicatorST. indicatorMUTE indicatorTONE indicatorLOUDNESS indicatorDSP MODEindicatorDIGITAL indicator6CH INPUT indicatorRDS indicatorPTY indicator AUTO indicatorTUNED indicatorDISCRETE 6.1indicatorMATRIX 6.1indicatorNEO:6indicator1 POWER ON/OFF key ^Use to turn the main power ON/OFF.2 ON/STANDBY key ^Use to switch the power ON/STANDBY whenthe POWER is turned ON.STANDBY indicator3 DIMMER keyUse to select the REC MODE. ¡Use to adjust the brightness of the display.⁄4 LISTEN MODE key •Use to select the listening mode.5 Surround LED (light-emitting diode)indicatorsACTIVE EQ mode LED indicator )Lights when this model is in the ACTIVE EQmode.DTS mode LED indicator •Lights when this model is in the DTS mode.DOLBY DIGITAL mode LED indicator •Lights when this model is in the Dolby Digitalmode.6 SOUND key ºUse to adjust the sound quality and theambience effects.7 MULTI CONTROL knob ^Use to control a variety of settings.8 INPUT SELECTOR knob (Use to select the input sources.9 VOLUME CONTROL knob (0 PHONES jack )Use for headphone listening.! SPEAKERS ON/OFF key (Use to turn the speakers ON/OFF.@ ACTIVE EQ key )Use to select ACTIVE EQ setting.# INPUT MODE key 8Use to switch between full auto, digital andanalog inputs.$ BAND key ™Use to select the broadcast band.% AUTO/MONO keyUse to change “TAPE” indication to “MD”.(Use to select the auto tuning mode. ™^ MEMORY key £Use to store radio stations in the presetmemory.& SETUP key ^Use to select the speakers' settings etc.* MUTE key )Use to temporarily mute the sound.Input channel indicators* The Input channel indicators lightup to indicate the channels con-tained in the input signal. The “S”indicator lights when the surroundcomponent consists of a singlechannel.ON OFFPOWERPHONESSPEAKERS ON/OFFON/STANDBYSTANDBYACTIVE EQACTIVE EQ DTS DOLBY DIGITALINPUT MODE BAND AUTO/MONO MEMORY SETUPMUTEDOWN UPMULTI CONTROL INPUT SELECTORVOLUME CONTROLSOUNDDIMMER LISTEN MODE