Kenwood KRF-V6300D Instruction Manual

Contents

English 45TunerSymptom Cause RemedyRadio stations cannot be received. No antenna is connected. Connect an antenna. &The broadcast band is not set properly. Set the broadcast band properly. ›The frequency of the desired station is not tuned. Tune the frequency of the desired station. ›Interference Noise due to ignition of an automobile. Install the outdoor antenna away from the road.Noise due to interference from an electric appliance. Turn off the power to the appliance.Noise due to a nearby TV set. Install the unit farther away from the TV.A station which was preset cannot be received by pressingthe corresponding numeric key. The preset station belongs to a frequency that cannot bereceived. Preset a station with a receivable frequency. fiRemote control unitSymptom Cause RemedyRemote control operation is not possible. The remote control is set to the DVD player operationmode. Press any of the Input Source keys to select theappropriate operation mode.Batteries are exhausted. Replace with new batteries. 9The remote control unit is too far away from the mainsystem, controlling angle is too large, or there is anobstacle between this unit and the remote.Operate the remote control unit within the controllablerange. 9The remote control has not been changed to the operationmode for the Kenwood DVD player you wish to control. Press the [CD/DVD] or [DVD/6CH] key to activate theoperation mode for the component you want to controlbefore operation.

/ 48

Related manuals for Kenwood KRF-V6300D