38Additional InformationSpecifications Caution : Read this page carefully to ensure safeoperation.AUDIO sectionRated power output during STEREO operationDIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D.,at 6 Ω).............................................................................. 100 W + 100 WEffective power output during SURROUND operationFRONT (63 Hz ~ 12.5 kHz, 0.7% T.H.D. at 6 Ω, one channel driven).............................................................................. 100 W + 100 WCENTER (63 Hz ~ 12.5 kHz, 0.7% T.H.D. at 6 Ω, one channeldriven) ................................................................................. 100 WSURROUND (63 Hz ~ 12.5 kHz, 0.7% T.H.D. at 6 Ω, onechannel driven) ................................................... 100 W + 100 WTotal harmonic distortion ......................... 0.050% (1 kHz, 50W, 6 Ω)Frequency response (IHF '66)CD ............................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 75 dBCD ......................................................................................... 91 dBInput sensitivity / impedancePHONO (MM) ......................................................... 2.5 mV / 27 kΩCD ......................................................................... 200 mV / 47 kΩMONITOR IN ........................................................ 200 mV / 47 kΩDVD/6CH INPUT .................................................. 200 mV / 47 kΩOutput level / impedanceTAPE REC .............................................................. 200 mV / 1 kΩMONITOR OUT ...................................................... 200 mV / 1 kΩPRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 70 Hz)TREBLE .......................................................... ±10 dB (at 10 kHz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30nmCoaxial ................................................................. 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩS-VIDEO inputs / outputsS-VIDEO (luminance signal) .................................. 1 Vp-p / 75 Ω(chrominance signal) ...................... 0.286 Vp-p / 75 ΩFM tuner sectionTuning frequency range ................................ 87.5 MHz ~ 108.0 MHzUsable sensitivity (DIN at 75 Ω)MONO ......................... 1.3 μV/13.2 dBf (40 kHz dev. S/N 26 dB)STEREO ...................... 45 μV/42.1 dBf (46 kHz dev. S/N 46 dB)Total harmonic distortion (1 kHz)MONO ........................................................ 0.2% (65.2 dBf input)STEREO .................................................... 0.8% (65.2 dBf input)Signal to noise ratio (DIN weighted)MONO .................................. 65 dB (40 kHz dev. 65.2 dBf input)STEREO .............................. 60 dB (40 kHz dev. 65.2 dBf input)Stereo separation (DIN 1 kHz) ................................................... 36 dBSelectivity (DIN ± 300 kHz) ........................................................ 64 dBFrequency response ................. (30 Hz ~ 15kHz), +0.5 dB, –3.0 dBMW tuner sectionTuning frequency range ................................... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod., S/N 20 dB) ......... 16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1mV input) ............................ 50 dBGENERALPower consumption .................................................................. 250 WAC outletSWITCHED ...................................................... (total 90 W max.)Dimensions ...................................................................... W : 440 mmH : 144 mmD : 399 mmWeight ......................................................................................... 8.6 kgNotes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).