Kenwood KRF-V7060D Service Manual

Also see for KRF-V6060D: Instruction manual Instruction manual Service manual

Contents

KRF-V6060D/V7060D/V8060D/X9060D/VR-6050/6060/607065SPECIFICATIONSNotes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).For the U.K. onlyAUDIO section (KRF-V6060D)Rated power output during STEREO operationDIN/IEC (63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω)............................................................................... 100 W + 100 WEffective power output during SURROUND operationFRONT (63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω one channel driven)100 W + 100 WCENTER ( 63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω one channeldriven) ...................................................................................... 100 WSURROUND (63 Hz ~ 12.5 kHz, 0.7 % T.H.D. at 6 Ω one channeldriven) ............................................................................. 100 W + 100 WTotal harmonic distortion ............................ 0.009 % (1 kHz, 50 W, 6 Ω)Frequency responseLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)................................................. 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dBPHONO ‘RIAA’ response ............... 40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dBMaximum input levelPHONO (MM) ..................................... 45 mV, 1 % T.H.D. at 1 kHzSignal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 75 dBLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)............................................................................................... 95 dBLoudness controlVOLUME at –30 dB level ........................................ +6 dB (100 Hz)Input sensitivity / impedancePHONO (MM) ......................................................... 6.0 mV / 47 kΩLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)............................................................................... 500 mV / 47 kΩOutput level / impedanceTAPE REC ............................................................... 500 mV / 1 kΩPRE OUT (SURROUND BACK CHANNEL) ............... 2.5 V / 1 kΩPRE OUT (SUBWOOFER) .......................................... 2.5 V / 1 kΩTone controlBASS ................................................................. ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)DIGITAL AUDIO sectionSampling frequency .......................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical .............................. (–15 dBm ~ –24 dBm), 660 nm ±30 nmCoaxial .................................................................... 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩS VIDEO inputs /outputsS VIDEO (luminance signal) ................................... 1 Vp-p / 75 ΩS VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 ΩFM tuner sectionTuning frequency range ....................................... 87.5 MHz ~ 108 MHzUsable sensitivityMONO ............... 1.3 μV (75 Ω)/ 13.2 dBf (40 kHz dev, S/N 26 dB)STEREO ...... 45 μV (75 Ω)/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)Total harmonic distortionMONO (1 kHz, 40 kHz dev) .......................... 0.2% (65.2 dBf input)STEREO (1 kHz, 40 + 6 kHz dev) ................ 0.8% (65.2 dBf input)Signal to noise ratio (DIN weighted at 1 kHz)MONO .......................................................... 65 dB (65.2 dBf input)STEREO ...................................................... 60 dB (65.2 dBf input)Stereo separation (1 kHz) ............................................................. 36 dBSelectivity (±300 kHz) ................................................................. 64 dBFrequency response (30 Hz ~ 15kHz) ....................... +0.5 dB, –3.0 dBMW tuner sectionTuning frequency range ........................................ 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod, S/N 20 dB) ................ 16 μV / (600 μV/m)Signal to noise ratio (400 Hz, 30% mod)............................................................ 50 dB (60 dBμ VEMF input)GENERALPower consumption ................................................................. 330 WAC outletSWITCHED ........................................................ (total 90 W max.)Dimensions ...................................................... W : 440 mm (17-5/16")H : 159 mm (6-1/4")D : 392 mm (15-7/16")Weight (Net) .................................................................. 9.8 kg (21.6 lb)

/ 58

Related manuals for Kenwood KRF-V6060D