Kenwood KRF-V8070D Instruction Manual

Also see for KRF-V8070D: Service manual Service manual

32 ENENGLISHSurround playThe DTS compatible models can reproduce a CD, DVD, or LD carrying theDTS mark.DOLBY DIGITAL can be used when playing DVD or LD software bearingthe mark and DOLBY DIGITAL format digital broadcasts (etc.).DOLBY PRO LOGIC can be used when playing video, DVD, or LDsoftware bearing the mark.SRS Circle Surround II enables you to listen to multi channel sound fromthe stereo source.Preparations• Turn ON related components.• Complete “Preparing for surround sound” (speaker settings). *• Use the Input Selector keys to select the component you wish to playback with surround sound.• Use the INPUT MODE key to select the input mode (analog or digital)for the source you wish to play back. 8• Noise will be produced when a DTS source is played by selecting theanalog input.1 Start playing the video software.2 Use the LISTEN MODE knob or Listen Mode 5/ ∞keys toselect the listening mode.The listening mode settings are stored separately for each input. Ifthe input mode is set to full auto (“AUTO DETECT” lights), thereceiver selects the optimal listening mode automatically based onthe type of input signal and the speaker settings.Each turn of the LISTEN MODE knob or press of the Listen Mode5/ ∞ keys switches the setting as listed below.The listening mode settings are different depending on the typeof input signal.When the DOLBY DIGITAL or DOLBY DIGITAL EX signal isinput :(The DOLBY DIGITAL or PRO LOGIC, indicator lights up.)1 DOLBY DIGITAL : DOLBY DIGITAL surround.2 DOLBY D EX : DOLBY DIGITAL EX surround.3 PLII MOVIE : PRO LOGIC II surround MOVIE mode.(The PRO LOGIC indicator lights up.)4 PLII MUSIC : PRO LOGIC II surround MUSIC mode.(The PRO LOGIC indicator lights up.)5 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode.(The PRO LOGIC indicator lights up.)6 STEREO : Normal stereo playback.Ambience effectsWhen you select DOLBY DIGITAL“DOLBY DIGITAL” will be displayed.SBSWDOLBY DIGITALPRO LOGICLSL SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETESTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXLFEWhen the DTS or DTS-ES (matrix or discrete) signal is input :1 DTS : (DTS indicator lights up.)2 DTS-ES MATRIX : (DTS and MATRIX indicators light up.)3 DTS-ES DISCRETE : (DTS and DISCRETE indicators light up.)4 STEREO : Normal stereo playback.When the analog signal or the digital signal (except forDOLBY DIGITAL or DTS signal) is input :1 PLII MOVIE : PRO LOGIC II surround MOVIE mode.(The PRO LOGIC indicator lights up.)2 PLII MUSIC : PRO LOGIC II surround MUSIC mode.(The PRO LOGIC indicator lights up.)3 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode.(The PRO LOGIC indicator lights up.)4 NEO:CINEMA : NEO:6 surround.(The NEO:6 indicator lights up.)5 NEO:MUSIC : NEO:6 surround.(The NEO:6 indicator lights up.)6 CSII CINEMA : CS 6.1 surround.(The CS II indicator lights up.)7 CSII MUSIC : CS 6.1 surround.(The CS II indicator lights up.)8 CSII MONO : CS 6.1 surround.(The CS II indicator lights up.)9 STEREO : Normal stereo playback.(The STEREO indicator lights up.)• Dolby Digital or DTS signal having more channels than the maximumnumber of playback channels available using the receiver’s currentsettings is input, downmixing is performed to match the number ofavailable channels.3DSP mode (Digital Signal Processor).DSP can produce these effects without spoiling the sound quality ofthe original music or video source.1 Pressing the DSP key or DSP Mode key will display thecurrent DSP MODE status.2 Each press of the key will switch to the next status as shownbellow:1 ARENA : DSP surround ARENA mode.2 JAZZ CLUB : DSP surround JAZZ CLUB mode.3 THEATER : DSP surround THEATER mode.4 STADIUM : DSP surround STADIUM mode.5 DISCO : DSP surround DISCO mode.• The DSP mode selection is displayed for approximately 3 seconds.4Adjust the volume.Notes• Depending on the type of the signal or speaker setting, some listeningmodes cannot be selected.• When playback is started, the sound may be cut or interrupted beforethe input source is confirmed as Dolby Digital.• To enjoy Dolby Digital surround (as well as all the other listening modes)from a single component, be sure to use a Dolby Digital compatiblesource component.InputSelectorInput ModeDSP INPUT MODELISTEN MODEInput SelectorDSP ModeListen Mode 5/ ∞