Kenwood KRF-V8080D Service Manual

Also see for KRF-V8080D: Instruction manual Service manual

Contents

specifications

KRF-V8080D/V8080D-S/VR-805038SPECIFICATIONSKRF-V8080DAUDIO sectionRated power output during STEREO operationDIN/IEC (63Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω)........................................................................................100 W + 100 WEffective power output during SURROUND operationFRONT(63Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω one channel driven)......................................................................100 W + 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven)......................................................................130 W + 130 WCENTER(63Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω one channel driven).....................................................................................100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) .........130 WSURROUND(63Hz ~ 12.5 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)......................................................................100 W + 100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven)......................................................................130 W + 130 WSurround Back/subwoofer(63Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω one channel driven).....................................................................................100 W(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) .........130 WTotal harmonic distortion..................0.009 % (1 kHz, 50 W, 6 Ω)Frequency response(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)........................................10 Hz ~ 100 kHz, +0 dB ~ –3.0 dBPHONO ‘RIAA’ response .....40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dBMaximum input levelPHONO (MM) ...........................40 mV, 1 % T.H.D. at 1 kHzSignal to noise ratio (IHF’66)PHONO (MM) ...............................................................75 dB(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)......................................................................................95 dBLoudness controlVOLUME at –30 dB level...............................+6 dB (100 Hz)Input sensitivity / impedancePHONO (MM) ................................................6.0 mV / 47 kΩ(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)500 mV / 47 kWOutput level / impedanceTAPE REC ......................................................500 mV / 1 kΩPRE OUT (SURROUND BACK CHANNEL)..........1 V / 1 kΩPRE OUT (SUBWOOFER) ....................................1 V / 1 kΩTone controlBASS .......................................................±10 dB (at 100 Hz)TREBLE ...................................................±10 dB (at 10 kHz)DIGITAL AUDIO sectionSampling frequency ...............32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical .....................(–15 dBm ~ –24 dBm), 660 nm ±30 nmCoaxial...........................................................0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite)...........................................1 Vp-p / 75 ΩS VIDEO inputs /outputsS VIDEO (luminance signal).............................1 Vp-p / 75 ΩS VIDEO (chrominance signal)..................0.286 Vp-p / 75 ΩCOMPONENT VIDEO inputs/ outputsCOMPONENT VIDEO (luminance signal)........1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/CR-signal)......±0.32 Vp-p / 75 ΩFM tuner sectionTuning frequency range ..........................87.5 MHz ~ 108.0 MHzUsable sensitivityMONO .............1.3 μV (75 Ω)/ 13.2 dBf (40 kHz dev, S/N 26 dB)STEREO ....45 μV (75 Ω)/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)Total harmonic distortionMONO (1 kHz, 40 kHz dev) .................0.2% (65.2 dBf input)STEREO (1 kHz, 40 + 6 kHz dev)........0.8% (65.2 dBf input)Signal to noise ratio (DIN weighted at 1 kHz)MONO ................................................65 dB (65.2 dBf input)STEREO ............................................60 dB (65.2 dBf input)Stereo separation (1 kHz) ..................................................36 dBSelectivity (DIN ±300 kHz) .................................................64 dBFrequency response (30 Hz ~ 15 kHz) ............+0.5 dB, –3.0 dBAM tuner sectionTuning frequency range .............................531 kHz ~ 1,602 kHzUsable sensitivity (30% mod, S/N 20 dB)......16 μV / (600 μV/m)Signal to noise ratio (30% mod, 400 Hz).......................................50 dB (60 dBμV EMF input)GENERALPower consumption ...........................................................330 WAC outletSWITCHED ..................................................... (total 90 W max.)Dimensions..............................................W : 440 mm (17-5/16”)H : 159 mm (6-1/4”)D : 392 mm (15-7/16”)Weight (Net) ......................................................11.7 kg (25.8 lb)

/ 29

Related manuals for Kenwood KRF-V8080D