Kenwood KS-3270EX Instruction Manual

Also see for KS-3270EX: Istruzioni per l'uso

Contents

ENGLISH4 ENInstallation MethodsOn the WallYou can hang the front and surround speakers on the wallvertically, and the center speaker horizontally.÷ The supplied speaker wires are color-coded according tothe speakers to be connected. See the description in“Connections” for details.7 Front speaker , Surround speaker1. Screw a single screw into the wall at the desired loca-tion. Screw it only part way in, so that the screw projects8 to 10 mm (5/16 to 3/8 inches) outward from the wallsurface.2. Hang the speaker by fitting the mount hole (at the rearof the speaker) over the extending part of the screw.Confirm that the speaker is held firmly and securely inplace.7 Center speaker1. Remove the two screws from speaker and, using theremoved screws, attach two brackets to the rear of thespeaker. Check the top and bottom of each bracket andattach it correctly as shown.2. Screw two screws into the walls 217 mm (8-9/16 inches)apart, making sure that screws are horizontally level.Screw each screw only part way in, so that the screwprojects 4 to 6 mm (3/16 to 1/4 inches) outward fromthe wall surface.3. Hang the speaker by fitting the two mount holes (at therear of the speaker) over the extending part of the screw.Confirm that the speaker is held firmly and securely inplace.PrecautionsPlease observe the following precautions when mounting speakers onto the wall.• Be sure that the wall you are using is strong enough to support the full weight of the speaker (approx. front speaker : 0.8 kg[1.8 lb], center speaker : 1.8 kg [3.9 lb], surround speaker : 0.8 kg [1.8 lb]).• Wall screws must be purchased separately. Be sure to use screws that are appropriate for the wall you are using, and thatare long enough to provide sufficient strength.• If you are uncertain about the wall’s support strength, the type of screw to use, or any other points regarding this type ofinstallation, please consult a contractor or other qualified person before proceeding.Be sure to follow the procedure given here when carrying out installation. Kenwood can assume no liability for injuryor damage that may occur if a speaker setup falls from the wall as a result of incorrect installation or insufficientsupport strength.Various mounting methods7 On the optional kenwood stand (SR-8000)The speaker can be installed on the SR-8000 stand optionally available from KENWOOD.Remove the two screwsCenter speaker8 - 10 mm (5/16 - 3/8”)217 mm(8 - 9/16”)4 - 6 mm (3/16 - 1/4”) BracketScrewE ffe c t i ve t h r e a dlengthM5 screw7 On the commercially available speaker mount orbracketAny commercially available speaker mount or bracket can alsobe used (provided that the speaker can be fixed using an M5screw with a pitch of 60 mm and effective thread length of 10to 13 mm).For details, read the instruction manual for the speaker mountor bracket.