Kenwood KS-8200EX Instruction Manual

Also see for KS-8200EX: Istruzioni per l'uso

Contents

7 ENENGLISH÷ The supplied speaker wires are color-coded according tothe speakers to be connected. See the description in“Connections” for details.7 Front speaker1 Screw two screws on two vertically lined-up positions onthe wall by leaving a distance of 217 mm (8-9/16 inches)between them. Screw each screw only part way in, sothat the screw projects 4 to 6 mm (3/16 to 1/4 inches)outward from the wall surface.2 Hang the speaker by fitting the two mount holes (at therear of the speaker) over the extending part of the screw.Confirm that the speaker is held firmly and securely in place.7 Center speaker1 Screw two screws into the walls 217 mm (8-9/16 inches)apart, making sure that screws are horizontally level. Screweach screw only part way in, so that the screw projects 4to 6 mm (3/16 to 1/4 inches) outward from the wall sur-face.2 Hang the speaker by fitting the two mount holes (at therear of the speaker) over the extending part of the screw.Confirm that the speaker is held firmly and securely in place.7 Surround speaker1 Screw a single screw into the wall at the desired location.Screw it only part way in, so that the screw projects 6 to10 mm (1/4 to 3/8 inches) outward from the wall surface.2 Hang the speaker by fitting the mount hole (at the rear ofthe speaker) over the extending part of the screw. Confirmthat the speaker is held firmly and securely in place.Various mounting methods7 On the optional kenwood stand (SR-8000)The speaker can be installed on the SR-8000 stand optionallyavailable from KENWOOD.7 On the commercially available speaker mount orbracketAny commercially available speaker mount or bracket can alsobe used (provided that the speaker can be fixed using an M5screw with a pitch of 60 mm and effective thread length of 10to 13 mm).For details, read the instruction manual for the speaker mountor bracket.PrecautionsPlease observe the following precautions when mounting speakers onto the wall.• Be sure that the wall you are using is strong enough to support the full weight of the speaker (approx. front speaker: 1.8 kg[3.9 lb],center speaker: 1.8 kg [3.9 lb], surround speaker: 0.8 kg [1.8 lb]).• Wall screws must be purchased separately. Be sure to use screws that are appropriate for the wall you are using, and thatare long enough to provide sufficient strength.• If you are uncertain about the wall’s support strength, the type of screw to use, or any other points regarding this type ofinstallation, please consult a contractor or other qualified person before proceeding.Be sure to follow the procedure given here when carrying out installation. Kenwood can assume no liability for injuryor damage that may occur if a speaker setup falls from the wall as a result of incorrect installation or insufficientsupport strength.Installation MethodsE ffe c t i ve t h r e a dlengthM5 screwRemove thetwo screwsFront speakerCenter speaker217 mm(8 - 9/16”)217 mm(8 - 9/16”)6 - 10 mm(1/4 - 3/8”)4 - 6 mm(3/16 - 1/4”)