Troubleshooting Guide (continued)Specifications:Audio output (100 ~ 250 ohms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .950mV RMSFuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3A fast blowPower supply requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 ~ 16V, negative groundDimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5”(W) x 4 5/16 ”(D) x 1 3/4 ”(H)Here 2 Anywhere Instruction Manual 27Troubleshooting guideHere 2 Anywhere Instruction Manual26Problem Possible Cause SolutionNo power on Here2Anywhere (powerindicator /display not illuminated)Power supply/cigarette lighteradapter not properly connectedBlown fuse in cigarette lighteradapterMake sure power supply/adapteris properly connectedCheck the fuse; if blown, replacewith supplied spare fuseNo sound Audio cable/cassette adapter notproperly connectedMake sure cable/adapter isproperly connectedDisplay reads “Acquiring Signal” Signal is weak or can’t be foundCheck the Antenna Signal screen(see page 25); Change theantenna/vehicle location tomaximize signal qualityDisplay reads “Antenna Error” The antenna is not connectedThe antenna or cable is faultyVerify antenna connectionsReplace antennaDisplay reads “Call 1-888-539-SIRIUS toSubscribe”SIRIUS subscription has not beenactivatedCall SIRIUS to activate yoursubscriptionDisplay reads “Invalid Channel” Stream entered is invalid Select a different SIRIUS streamProblem Possible Cause SolutionHere 2Anywhere operateserroneously Microprocessor errorTurn the power off (press thePOWER button), wait 5 – 10seconds, then turn the power onagain.Turn the unit’s power off, removeit from the dock, wait 5 – 10seconds, replace it in the dockand turn the power back on.If the problem persists, consultyour Kenwood dealer.