Kenwood KTC-HR100 Instruction Manual

Also see for KTC-HR100: Service manual

Contents

— 10 —EnglishMounting the HD Radio tuner unit• Install the HD Radio tuner unit in a well-ventilated location and do not placeobjects on top of it.• When installing to the car, the unit should be securely fastened at a locationthat will not interfere with driving.• When making a hole in the chassis, check that the gas tank, break pipe, wireharness, or other part is not located on the other side, and be careful not tocause scratches.• When attaching the mounting fittings (Accessory2) to the HD Radio tunerunit, use only the supplied mounting screws (Accessory3) (M4 x 8 mm).Use of screws other than those supplied may result in internal damage orinsecure mounting and is very dangerous.2CAUTION■ Installation using the self-tapping screwsCarpetBoard etc.thickness: 20 mm or moreAccessory4 (Ø5 × 20 mm)Accessory2Accessory3(M4 × 8 mm)Carpet■ Installation using the velcro tapesAccessory5Please do not install the unit near the dashboard, the rear tray, or otherimportant components. Doing so could lead to injury or accident should theunit come off due to a shock and strike a person or an important component.Tapping screws should be used for mounting. (Attachment with velcro strips,although easy, can come off with a shock.)2CAUTION