4 | KTC-HR300Operations –CD Receiver–TuningSelecting the station.1 Select HD Radio sourcePress the [SRC] button.Select the "HD Radio"/"HD RADIO" display.2 Select the HD FM bandPress the [FM] button.Each time the [FM] button is pressed it switchesbetween the HF1, HF2, and HF3 bands.Select the HD AM bandPress the [AM] button.3 Tune up or down programPress the [4] or [¢] button.If the sub channel is available in Digital FMbroadcast when is set to Autoseek or Manual, the channel can be switched.Example:(HD FM band)Analog FM 1Digital FM 2Analog FM ™Digital FM-1ch 3Analog FM £Digital FM-2ch 4Digital FM-8ch 0Digital FM !… : Auto seek or Manual : Auto mode[4][¢]• During the reception of 1, tune up:2➡3➡4…• During the reception of !, tune down: !➡0…⁄• Using the modes can be switched todigital broadcast automatic switching, analog broadcastonly, or digital broadcast only.• When "Digital" has been set with , theseek time will be longer to allow a check of whether thetransmission is a digital broadcast.• It will take a few seconds to receive the digitalbroadcasting after selecting the frequency.• When Tune up button is pressed, it will switch to thenext frequency if it is switched before receiving theDigital broadcasting. (™➡£)• When Tune down button is pressed, it will be receivedfrom Analog broadcasting if the Digital broadcasting hasnever been received. (!➡£)• When is set to "Manual", the frequencywill be switched while pressing [4] or [¢] buttons.• Some of the models have the following displays whenthe Main channel and Sub channel are switched.- "Main"/"Primary"/"PRI": When it is switched to the Mainchannel- "Sub"/"Secondary"/"SEC": When it is switched to SubchannelReceive ModeSets the receive mode.1 Select menu mode using the control unit.Select the menu item.Select the "Receive Mode"/ "HDR mode" display.2 Open Receive modePress the setting button of the menu items inthe control unit for at least 1 second.3 Set the Receive modeSwitching the setting of menu items.Each time the button is pressed the Receive modeswitches as shown below.Receive mode Display OperationAuto mode "Auto" Automatically tunes to analogbroadcast when receiving the digitalbroadcast is impossible.Digital "Digital" Digital broadcasts only.Analog "Analog" Analog broadcasts only.4 Exit Receive modePress the [MENU] button.5 Exit Menu modeTuning ModeSets the tuning mode.Press the [AUTO] button.Each time the button is pressed the Tuning modeswitches as shown below.Tuning mode Display OperationAuto seek "Auto1" Automatic search for a station.Preset station seek “Auto2” Search in order of the stations inthe Preset memory.Manual "Manual"/“MANU” Normal manual tuning control.
