English - 7Operations6 -EnglishEvery receivable Channel is checked for 10seconds.Select SCAN in the MENU items of Controlunit, and press the [4] or [¢] button forat least 1 second.Canceling Channel ScanPress the [4] or [¢] button for at least 1second, or press the [MENU] button torelease MENU.Press the [AUTO] button for at least 2seconds.Canceling Channel ScanPress the [AUTO] button for at least 2seconds.You can switch from Up/Down of Channelin a category being selected toPrevious/Next of Category that includesChannel being received and vice versa.1 Enter Channel Search modePress the [#2] button for at least 1second.2 Select the ChannelPress the [4] or [¢] button.Select the CategoryPress the [FM] or [AM] button.1 Enter Channel Search modePress the [38] button.2 Select the ChannelPress the [4] or [¢] button.Select the CategoryPress the [FM] or [AM] button.You cannot operate this unit until all theCategory information is acquired.The Category that includes the Channelreceived switches to the next.Press the [AM] button.• If there is no receivable Channel in Category,the Category switches to the next.• You cannot operate this unit until all theCategory information is acquired.• Select category to switch to the first channelthat contains that category. Select anotherchannel in the same category, if necessary,on the display of the category name.Entering the channel and tuning.1 Select the preset bandPress the [FM] button on the remote.2 Enter Direct Access Tuning modePress the [DIRECT] button.3 Enter the channelPress the number buttons.4 Do Channel SearchPress the [4] or [¢] button.Canceling Direct Access TuningPress the [DIRECT] button on theremote.• If you make no button operation for 10seconds, the Direct Access Tuning mode isautomatically canceled.• You can set up to Channel number 223.• If there is no signal in the input Channel, ”NoChannel ” appears.• If you cannot receive any signal in the inputChannel due to a bad condition on radio waveor another problem, ”Acquiring Signal”appears.Direct Access Tuning (A modelsonly) (Function of remote)Switching Category (B modelsonly)Channel Search (A models only)Channel Scan (A models only)You can display various kinds of text datatransmitted from broadcasting stations byswitching as follows. (See the DisplaySwitch items of Control unit for details onhow to switch.)You can set up to 6 memories even on acontrol unit with 8 presets.KDC-X959,KDC-XMP609,KDC-819,KDC-719,KDC-X509>Information (Upper Part Display)Band & Channel NumberChannel NameSong TitleArtist NameAlbum TitleCategory NameInformation (Lower Part Display)Album TitleArtist NameSong TitleChannel NameWhat is displayed may partly depend oncontrol units to be connected.InformationBand & Channel NumberChannel NameSong TitleArtist NameCategory NameInformationChannel Number & Channel NameAlbum TitleCategory NameESNChannel NumberTimeInformationChannel Number & Channel Name /Channel NameSong Title & Artist Name & Album TitleCategory NameESNChannel NumberTimeSwitching Display
