Kenwood KTS-300MR Instruction Manual

Also see for KTS-MP400MR - Radio / CD: Training guide Service manual Instruction manual Instruction manual

Kenwood KTS-300MR Instruction Manual Manual pdf 11 page image

English | 11System QYou can recall the best sound setting preset fordifferent types of music.1 Select the source to setPress the [TU/SR] or [CD/CH] button.2 Select the Sound typePress the [Q] button.Each time the button is pressed the soundsetting switches.Sound setting DisplayFlat "Flat"User memory "User"Rock "Rock"Pops "Pops"Easy "Easy"Top 40 "Top40"Jazz "Jazz"• User memory: The values set on the

(page 11).Audio Control1 Select the source for adjustmentPress the [TU/SR] or [CD/CH] button.2 Enter Audio Control modePress the [AUD] button for at least 1 second.3 Select the Audio item for adjustmentPress the [FM] or [AM] button.Each time the button is pressed the items thatcan be adjusted switch as shown below.4 Adjust the Audio itemPress the [4] or [¢] button.Adjustment Item Display RangeBass Center Frequency*2 "Bass F" 60/70/80/100 or 150 HzBass level "Bass" –8 — +8Bass Q Factor*2 "Bass Q" 1.00/1.25/1.50/2.00Bass Extend*2 "Bass EXT" ON/OFFMiddle Center Frequency*2 "MID F" 0.5/1.0/1.5/2.0 kHzMiddle level "Middle" –8 — +8Middle Q Factor*2 "Middle Q" 1.0/2.0Treble Center Frequency*2 "TRE F" 10.0/12.5/15.0/17.5 kHzTreble level "Treble" –8 — +8Balance "Balance" Left 15 — Right 15Fader "Fader" Rear 15 — Front 15Sub woofer level*1 "SW Level" –15 — +15Front High Pass Filter*2 "HPF F" Through/100/125/170 HzRear High Pass Filter*2 "HPF R" Through/200 HzFront/Rear High PassFilter*3"HPF" Through/100/125/170HzSub woofer Low PassFilter*1"LPF SW" 50/80/120/THRU HzVolume offset "V-Offset" –8 — ±0Loudness "LOUD" ON/OFF• According to the Bass Q Factor setting value, thefrequencies that can be set in Bass Center Frequencychange as shown below.Bass Q Factor Bass Center Frequency1.00/1.25/1.50 60/70/80/1002.00 60/70/80/150• When the Bass Extend is set to ON, low frequencyresponse is extended by 20%.• Volume offset: Each source’s volume can be set as adifference from the basic volume.• Loudness: Compensating for low and high tonesduring low volume.• *1 You can control this item when (page 23) is set to "SWPRE Sub-W". (KTS-300MR only)• *2 Function of the KTS-MP400MR• *3 Function of the KTS-300MR5 Exit Audio Control modePress the [AUD] button.