Kenwood KVT-512DVD Service Manual

Also see for KVT-532DVD: Installation manual Instruction manual Instruction manual

Contents

19KVT-50DVDRY/512/522DVD/522DVDY/532DVD/532DVDMEnlarge OKEnlarge OK● Confirmation after adjustmentAfter the adjustment, check that the screen is horizon-tally symmetrical and that there is no blur on the screen.The “HPOSI OK” will be shown to indicate the comple-tion of the adjustment.4. Touch panel adjustment● Adjustment procedureq Press the Touch Key on the Test Mode Menu screen toenter the Touch panel adjustment screen.w Touch the center of “+” mark below in the following or-der.Upper left → Upper right → Lower left → Lower rightTo touch, make sure to use the designated touch stick.e After adjustment is completed for 4 areas, if “Write OK”is displayed, the adjustment is completed.Press Return to exit from the Touch screen.Cancel CancelCancelCancel∗ If the center of “+” mark wasn’t pressed accurately, pressCancel to start over the adjustment.NoteThe touch panel adjustment data is finalized when thetouch stick is released from the mark.Therefore, the Knack for Adjustment is not to release thetouch stick from the mark right after touching the centerof the “+” mark, but to confirm that the stick is exactlyon the center of the “+” mark while keeping touching thescreen. (If the stick is not exactly on the center of themark, move the stick onto the center of the mark whilekeeping touching the screen.)Then, quickly and vertically release the stick from thescreen.ADJUSTMENT