| 
42BLUETOOTHBLUETOOTHSettings for Bluetooth devicesYou can change various settings for using Bluetoothdevices on the screen.1 Display the screen.On the screen:• You can also display the screen by pressing [ ] on the phonecontrol screen. (Page 39)2 Configure the Bluetooth settings.R Setting itemsList>Press [Enter] to show the listof registered devices. You canconnect a device or deleteregistered devices. (Page 37) Changes the PIN code of the unit.(Page 36)Name>Shows the device name to beshown on the Bluetooth device —“KVT7”.Address>Shows the device address of theunit.Connect>• ON (Initial): A connection isautomatically established withthe last connected Bluetoothdevice when the unit is turnedon.• OFF: Cancels.Audio>Select the speakers used forBluetooth (both phone and audioplayer).• Front Only: Front speakers only.• All (Initial): All speakers.Response>• ON: The unit answers theincoming calls automaticallyafter 5 seconds.• OFF (Initial): The unit does notanswer the calls automatically.Answer the calls manually.< Auto Pairing> • ON (Initial): Establishespairing automatically with theconnected iOS device (such asiPhone) even if the Bluetoothfunction is deactivated onthe device. (Auto pairing maynot work for some devicesdepending on the iOS version.)• OFF: Cancels. • System (Initial): The ring toneset on the unit is used.• Phone: The ring tone set onthe mobile phone is used.(This function may not workdepending on the mobilephone.)Change>When is set to, select the ring tonefor received calls and SMS from[Tone1] (Initial), [Tone2], [Tone3]. Hold [Enter] to reset all settingsyou have made for usingBluetooth mobile phones andBluetooth audio players. |
