Kenwood KVT-847DVD Instruction Manual

Also see for KVT-837DVD: Installation manual Service manual

Contents

90 | EnglishThe following messages are displayed whencertain problems are occurring in your sys-tem. Take the recommended actions.Hot ErrorThe protective circuit in the unit activates when thetemperature inside the unit exceeds 60°C (140°F),stopping all operation.] Cool down the unit by opening the windows orturning on the air conditioner. As the temperaturefalls below 60°C (140°F), the disc will start playingagain.Hold ErrorThe protective circuit in the unit activates whenthe temperature inside the automatic disc changerexceeds 60°C (140°F), stopping all operation.] Cool down the unit by opening the windows orturning on the air conditioner. As the temperaturefalls below 60°C (140°F), the disc will start playingagain.Mecha ErrorThe disc player is malfunctioning.] Eject the disc and try inserting it again. Contact theKenwood dealer if this indicator continues blinkingor the disc cannot be ejected.Disc ErrorThe unplayable discs is inserted.Read ErrorThe disc is upside-down.] Load the disc with the labeled side up.The disc is quite dirty.] Clean the disc, referring to the section on cleaning> (page 15).Region code ErrorThe DVD software encoded for other region code.Parental level ErrorThe parental level is set to high levels.Error 07 — 67The unit is malfunctioning for some reason.] Press the reset button on the unit. If the "Error ##"code does not disappear, consult your nearestservice center.Troubleshooting Guide