Kenwood KX-66CW Service Manual

F arm ass'y (9}MEcHAN!sM DEscRlPTIONFunction slider (1o)FR trigger arm ('l3)Solenoid 2FR trigger gear |21|Fig. 5 Right before solenoid 2 is heldWhen the pin (a) is put into the groove, the solenoid 2 comesto the ON position again and is held in this position as it is.(Fig.5}At this time, the FR spring attached to the FR trigger armremains bent. The FR trigger gear is held by the touching ofthe FR trigger arm pin against the section @ of the cam in thefront, in which state the FF mode is entered.FR springsFlywheel gearCam faceto2-4 Rewind {REWI operation (Fig. 6lln the rewind operation, the solenoid 2 is attracted once andheld. Thus, the FR trigger arm is moved to the direction oíarrow Q) . By the FR spring, the F arm ass'y moves to thedirection of arrow @ and the pin (a) is put into the groove Rof the function slider. When the FR trigger gear is held by thepin of the FR trigger arm, the rewind mode is entered.l5Function slider (1o)Fig. 6 Rewind modeKX_66CWF arm ass'y (9) arm (13)FR springtriggero$".'$_)FR trigger geal (21|