LZ-651W61 How to entered to TEST modeAt the time of NAVI screen or AV IN screen, key is pushed inorder of the following by remote control unit.“↓” e “VOL▲ (+)” e “VOL▼ (-)” e “→” e “←” e“VOL▼ (-)” e “VOL▲(+)”* ←, ↑, →, ↓, mark are 3D Keys2 EXIT for TEST modePOWER OFF → ON or ACC OFF3 Setup mode (starting)Display mode : FULLVideo source : AV-INAudio source (SP mode) : NOMALVOLUME : 21SCREEN CONTROL• BRIGHT : MAX• TINT : CENTER• COLOR : CENTER• CONTRAST : CENTER• BLACK : CENTER• DIMMER : MIN (-30)SYSTEM CONTROL• NAVI : RGB• AV-IN : CAM• BEEP : ON4 Adjustment of video parameterIt is function for adjusting the setting value to the video pro-cessing IC.The value adjusted here is saved at E2PROM, and user can-not be changed for video parameter.4-1 Adjustment itemItem Display CH Default valueVCO FREERUN VCOFree CH16 0x80BLACK LIMITEER BLimit CH5 0xC0 (HGA:1)WHITE LIMITEER WLimit CH10 0x40BRIGHT Bright CH6 0x80CONTRAST Contras CH13 0x80Y GAIN YGain CH2 0x80GAMMA1 Gamma1 CH11 0x80GAMMA2 Gamma2 CH12 0x40Rch SUB BRIGHT RsubBri CH8 0x80Bch SUB BRIGHT BsubBri CH9 0x80Rch SUB CONTRAST RsubCon CH14 0x80Bch SUB CONTRAST BsubCon CH15 0x80VCOM Vcom CH1 0xDDCOMMON DC (FLICKER) Flicker CH23 0x804-2 Basic operationThe “DIRECT” key is pushed for time of NAVI screen or AV-INscreen in test mode (Invalid during menu, screen control, andsetup display). Cursor is expressed as red character and it isVCO free run the Initial function. Each adjustment value isexpressed as green character.You can choused item of the function used by remote controlcursor keys “↑”, “↓”, “→”, “←”.It decides by the “ENTER” key. Every item can be adjusted.Item name and setting value on the displayTEST MODEInitial screenSelection display