Kenwood MPT1327 Brochure & Specs

Contents

specifications

ADS#38905 Printed in USAJQA-QMA1205■ KMC-35Microphone(supplied microphone)■ KMC-36Keypad Microphone■ KMC-32Keypad Microphone■ KMC-9CControl StationDesktop Microphone■ KRK-10Control HeadRemote Kit (23ft/7m)■ KCT-46Ignition Sense Cable■ KCT-40Radio Interface Cable(for KDS-100, KGP-2A/2B)■ KCT-23MDC Cable (Dashmount / 10 feet)■ KCT-23M3DC Cable (Remotemount / 23 feet)■ KAP-2Horn Alert/PublicAddress Relay Unit■ VGS-1Voice Guide &Storage Unit■ KES-3External Speaker■ KES-5External Speaker(requires KAP-2)■ KMB-10Key Lock Adapter■ KLF-2Line Noise Filter■ KPS-10ADC Power Supply■ KPS-15DC Power SupplyAll accessories and options may not be available in all markets.Contact an authorized Kenwood dealer for details and complete list of all accessories and options.Model TK-7180 TK-7180H TK-8180 TK-8180HGENERALFrequency RangeType 1 136~174 MHz 450~520 MHzType 2 – 400~470 MHzNumber of Channels*Conv. Mode Max.32 per RadioTrunked Network 1023Channel SpacingWide 25 kHz, 30 kHz 25 kHzNarrow 12.5 kHz, 15 kHz 12.5 kHzOperating Voltage 13.6 V DC±15 %Current DrainStandby 0.4 A 0.4 A 0.4 A 0.4 AReceive 1.0 A 1.0 A 1.0 A 1.0 ATransmit 9.0 A 13.0 A 9.0 A 13.0 ADuty Cycle Transmit: 20 %Operating Temperature Range -22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)Frequency Stability ±0.00025 % (-22 ºF ~ +140 ºF)Antenna Impedance 50 ΩChannel Frequency SpreadType 1 38 MHz 70 MHzType 2 – 70 MHzDimensions (W x H x D), 6-5/16” x 1-3/4” x 6-3/16”Projections not included (160 mm x 45 mm x 157 mm)Weight (net) 3.3 lbs. (1.5 kg)FCC IDType 1 K4437303110 K4437303210 K4437313110 K4437313210Type 2 – – – K4437313120 K4437313220IC CertificationType 1 282F-37303110 – – –Type 2 – – – 282F-37313120 –Model TK-7180 TK-7180H TK-8180 TK-8180HRECEIVER (Measurements made per EIA/TIA-603)Sensitivity (12dB SINAD)Wide 0.25 μVNarrow 0.28 μVSelectivity**Wide 80 dB 80 dBNarrow 70 dB 67 dBIntermodulation DistortionWide/Narrow 75 dB (±50, 100 kHz)Spurious Response** 90 dB 85 dBAudio Output(4 Ω Impedance) 4 W with less than 5 % distortionTRANSMITTER (Measurements made per EIA/TIA-603)RF Output PowerType 1 30 to 1 W 50 to 10 W 30 to 1 W 45 to 10 W(490 -520 MHz:25 to 1 W) (490 -520 MHz:40 to 10 W)Type 2 – – 30 to 1 W 45 to 10 WSpurious Response 70 dBType of EmissionWide 16K0F3ENarrow 11K0F3EFM Hum & NoiseWide 50 dBNarrow 45 dBMicrophone Impedance 600 ΩAudio DistortionWide/Narrow 3 %Standard MIL 810C MIL 810D MIL 810E MIL 810FMethods/Procedures Methods/Procedures Methods/Procedures Methods/ProceduresLow Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, IIHigh Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, IILow Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, IITemperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, IISolar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure IRain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, IIIHumidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, IIIVibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure IShock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, VInternational Protection StandardDust & Water Protection P54: Radio itselfP54/55: Remote Head with KRK-10*To meet above Mil810 and IP grade, weather proof microphone KMC-35 or KMC-36 has to be connected.*Maximum capability depends on the number of programmed Zone and repeater channels.** Typical specificationsKenwood follows a policy of continuousadvancement in development. For this reasonspecifications may be changed withoutnotice.OptionsSpecificationsApplicable MIL-STD & IPfootnotes from Front:1 Easy Option Port: Supports Encryption boards or VGS-1 only;ANI boards are not supported. VGS-1: Auto-Reply only operatesin MPT trunked mode. Auto-Record, Voice Memo operates inConventional & MPT Trunked modes.2 DTMF Manual Encode (DTMF microphone required)3 KCT-46 ignition sense cable option required; plugs into mobileignition sense pig-tail cable.4 KPG-96D required: Windows®98/ NT/ 2000/ Me/XP compatible.5 MIL-STD “Driven-Rain” and IP-55 Water/Dust Intrusion applyto remote control head only; IP54 applies to radio chassis.6 Conventional Mode: Mode entry by PF key or auto Mode Change.Network/Trunking operations are MPT1327/1342 compataible.7 Special Alert Tone Patterns: enabled for MPT Individual Call, AutoMode Change.8 Companded Audio can be enabled for “all Channels: in TrunkedMode and per Channel in Conventional Mode.9 KAP-2 required: Public Address & Horn Alert operate inMPT mode only.* TK-8180K/HK models are derated to 25W/ 40W power from490-512 MHz

/ 2

Related manuals for Kenwood MPT1327