Kenwood NEXEDGE NX-220 Instruction Manual

Also see for NEXEDGE NX-220: Instruction manual Instruction manual Service manual Instruction manual Instruction manual

Contents

v• Do not charge the battery near fire or under direct sunlight!If the battery’s protection circuit is damaged, the battery maycharge at extreme current (or voltage) and an abnormal chemicalreaction may occur. The battery may generate heat or smoke,rupture, or burst into flame.• Use only the specified charger and observe chargingrequirements!If the battery is charged in unspecified conditions (under hightemperature over the regulated value, excessive high voltage orcurrent over regulated value, or with a remodeled charger), it mayovercharge or an abnormal chemical reaction may occur. Thebattery may generate heat or smoke, rupture, or burst into flame.• Do not pierce the battery with any object, strike it with aninstrument, or step on it!This may break or deform the battery, causing a short-circuit. Thebattery may generate heat or smoke, rupture, or burst into flame.• Do not jar or throw the battery!An impact may cause the battery to leak, generate heat or smoke,rupture, and/or burst into flame. If the battery’s protection circuitis damaged, the battery may charge at an abnormal current (orvoltage), and an abnormal chemical reaction may occur. Thebattery may generate heat or smoke, rupture, or burst into flame.• Do not use the battery pack if it is damaged in any way!The battery may generate heat or smoke, rupture, or burst intoflame.• Do not solder directly onto the battery!If the insulator is melted or the gas release vent or safety functionis damaged, the battery may generate heat or smoke, rupture, orburst into flame.• Do not reverse the battery polarity (and terminals)!When charging a reversed battery, an abnormal chemical reactionmay occur. In some cases, an unexpected large amount of currentmay flow upon discharging. The battery may generate heat orsmoke, rupture, or burst into flame.