Kenwood NX-3000 series User Manual

Also see for NX-3000 series: User guide User manual User guide User manual User guide

Contents

17instaLLinG the CaP over the UniversaLConneCtor <nX-3200/ nX-3300>1 If you are not using an optionalspeaker/ microphone or headset,install the cap over the universalconnector.2 Secure the cap in place usingthe dressing screw.Universalconnector capinstaLLinG the (oPtionaL) sPeaKer/ MiCroPhoneor heaDset <nX-3200/ nX-3300>1 Insert the guide of the speaker/ microphone or headsetconnector into the groove of the universal connector.2 Secure the connector in place using the attached screw.Optional speaker/microphonenote:• When not using an optional speaker/ microphone or headset,install the cap over the universal connector.• The noise canceling function on KMC-54WD Speaker Microphoneworks using the built-in DSP of the transceiver, and can only be usedwith NX-3000 series Portable models.