(No.RA070)1-47[AnalogNarrow]1) Adj item: [DQT Deviation (AnalogNarrow)]2) Deviation meterLPF: 3kHz/ HPF: OFF3) Adj points: 10 points[8TX L], [8TX C], [8TX H],[8RX/TA L], [8RX/TA C],[8RX/TA H], [9TX L], [9TX H],[9RX/TA L], [9RX/TA H]4) Press [Transmit] button.DeviationmeterOscilloscope[+], [-] Write fixed value "433" for eachadjustment point. Transmit ateach adjustment point and checkthat the Analog deviation is withinthe Specifications.Press [Apply] button for , or[ ] button for to storethe adjustment value.0.35kHz±0.05kHz1) Adj item: [An DQT]2) Deviation meter*Same as above3) Adj points: *Same as above4) PTT : ON[], []10. LTRDeviation[Analog Wide5k]1) Adj item: [LTR Deviation (AnalogWide 5k)]2) Deviation meterLPF: 3kHz/ HPF: OFF3) Adj points: 6 points[8TX L], [8TX C], [8TX H],[8RX/TA L], [8RX/TA C],[8RX/TA H]4) Press [Transmit] button.DeviationmeterOscilloscope[+], [-] Write fixed value "518" for eachadjustment point. Transmit ateach adjustment point and checkthat the Analog deviation is withinthe Specifications.Press [Apply] button for , or[ ] button for to storethe adjustment value.1.00kHz±0.05kHz1) Adj item: [Aw LTR]2) Deviation meter*Same as above3) Adj points: *Same as above4) PTT : ON[], [][Analog Wide4k]1) Adj item:LTR Deviation (AnalogWide 4k)]2) Deviation meterLPF: 3kHz/ HPF: OFF3) Adj points: 6 points[8TX L], [8TX C], [8TX H],[8RX/TA L], [8RX/TA C],[8RX/TA H]4) Press [Transmit] button.DeviationmeterOscilloscope[+], [-] Write fixed value "502" for eachadjustment point. Transmit ateach adjustment point and checkthat the Analog deviation is withinthe Specifications.Press [Apply] button for , or[ ] button for to storethe adjustment value.0.90kHz±0.05kHz1) Adj item: [As LTR]2) Deviation meter*Same as above3) Adj points: *Same as above4) PTT : ON[], []Item Condition Measurement Adjustment Specifications/Remarks: PC tuning mode: Panel tuning modeUnit Parts Method |
