Kenwood NX-5700 User Manual

Also see for NX-5800: Common Function Reference Function reference Installation guide User manual User guide

Contents

12BASIC OPERATIONSWITCHING POWER ON/ OFFPress [ ] to switch the transceiver ON.Press [ ] again to switch the transceiver OFF.ADJUSTING THE VOLUMEPress the key programmed as [Volume Up] to increase the volume. Press thekey programmed as [Volume Down] to decrease the volume.SELECTING A ZONE AND CHANNELSelect the desired zone and channel using the keys programmed as [Zone Up]/[Zone Down] and [Channel Up]/ [Channel Down].•฀ The฀transceivers฀may฀have฀names฀programmed฀for฀zones฀and฀channels.฀The฀zone฀name and channel name can contain up to 16 and 14 characters respectively. Whileselecting a zone, the zone name will appear above the channel name.•฀ If฀programmed฀by฀your฀dealer,฀your฀transceiver฀will฀announce฀the฀zone฀and฀channel฀numbers as you change them.TRANSMITTING1 Select the desired zone and channel.2 Press the PTT switch and speak into the microphone. Release the PTT switchto receive.•฀ The฀LED฀indicator฀lights฀red฀while฀transmitting฀and฀green฀while฀receiving฀a฀signal.฀This indicator can also be disabled by your dealer.•฀ For฀best฀sound฀quality,฀hold฀the฀microphone฀approximately฀1.5฀inches฀(3฀~฀4฀cm)฀from your mouth.RECEIVINGSelect the desired zone and channel. If signaling has been programmed on theselected channel, you will hear a call only if the received signal matches yourtransceiver settings.

/ 16

Related manuals for Kenwood NX-5800