Kenwood NX-720H(G) Service Manual

Also see for Nexedge NX-720H: Instruction manual Instruction manual Instruction manual

Contents

NX-720H(G)/720H33-3. RadioThe universal mount bracket allows the radio to bemounted in a variety of ways. Be sure the mounting surfaceis adequate to support the radio’s weight. Allow sufficientspace around the radio for air cooling. Position the radioclose enough to the vehicle operator to permit easy accessto the controls when driving.3-4. DC Power and wiring1. This radio may be installed in negative ground electricalsystems only. Reverse polarity will cause the cable fuseto blow. Check the vehicle ground polarity before installa-tion to prevent wasted time and effort.2. Connect the positive power lead directly to the vehiclebattery positive terminal. Connecting the Positive lead toany other positive voltage source in the vehicle is not rec-ommended.3. Connect the ground lead directly to the battery negativeterminal.4. The cable provided with the radio is sufficient to handlethe maximum radio current demand. If the cable must beextended, be sure the additional wire is sufficient for thecurrent to be carried and length of the added lead.4. INSTALLATION PLANNING – CONTROL STATIONS4-1. Antenna systemControl station. The antenna system selection dependson many factors and is beyond the scope of this manual.Your KENWOOD dealer can help you select an antenna sys-tem that will best serve your particular needs.4-2. Radio locationSelect a convenient location for your control station radiowhich is as close as practical to the antenna cable entrypoint. Secondly, use your system’s power supply (which sup-plies the voltage and current required for your system). Makesure sufficient air can flow around the radio and power sup-ply to allow adequate cooling.SERVICEThis radio is designed for easy servicing. Refer to theschematic diagrams, printed circuit board views, and align-ment procedures contained in this manual.NOTEIf you do not intend to use the speaker 3.5-mm jack andthe D-sub 15-pin connector, fit the supplied speaker-jack capand ACC cap to stop dust and sand from getting in.ACC.Speakerjack capPower inputconnectorAntennaconnector ACC. cap SMAW/GPS TypeonlyGENERAL