NX-80062ControlsKMC-36ModularMIC jackKeypad[HOOK]Channel Up/Down key[PTT]Power switchVolume Up/Down keyProgrammable function keysPanel Test Mode■ Test mode operation featuresThis transceiver has a test mode. To enter test mode,press and hold the [ ] key while turning the transceiverpower ON. Before the transceiver enters test mode, thefrequency version information appears on the LCD mo-mentarily. Test mode can be inhibited by programming. Toexit test mode, turn the transceiver power OFF. The follow-ing functions are available in test mode.■ Key operationKey “FNC” not appears on the sub LCD displayFunction Display[ ] / [ ] Test CH up/down Channel No.[ ] / [ ] Volume up/down -[ ] Push: Squelch level upHold: Squelch offSquelch levelSquelch off: icon appears[ ] Wide/Narrow/Very narrowWide: “w”Narrow: “n”Very narrow: “v”[ ] Shift to panel tuning mode -[ ] Function on “FNC” appears on the subLCD display[ ] MSK 1200bps and 2400bps 2400bps: icon appears[ ] Test signaling CH up Signaling No.ADJUSTMENT / 调整控制KMC-36模块化MIC插孔键盘[HOOK]信道上/下键[PTT]电源开关音量高/低键可编程功能键面板测试模式■ 测试模式操作功能本车载对讲机有测试模式。要进入测试模式,打开车载对讲机电源时,按住 [ ] 键。车载对讲机进入测试模式之前,LCD 上短时间出现频率版本信息。可以通过编程禁用测试模式。如需退出测试模式,请关闭车载对讲机电源。在测试模式可以使用下列功能。■ 键操作键 副 LCD 显示上不出现“FNC”功 能 显 示[ ]/[ ] 测试信道递增 / 递减 信道号[ ]/[ ] 音量升高 / 降低 -[ ] 按下 : 静噪电平递增按住 : 静噪关静噪电平静噪关 : 图标出现[ ] 宽 / 窄 / 超窄宽 :“w”窄 :“n”超窄 :“v”[ ] 换到面板调谐模式 -[ ] 功能开 副 LCD 显示上出现“FNC”[ ] MSK 1200bps 和 2400bps 2400bps: 图标出现[ ] 测试信令信道递增 信令号