Kenwood Nexedge NX-210K2 Instruction Manual

Also see for NEXEDGE NX-210: Function reference Instruction manual Instruction manual Specification Service manual

2■ VOX Operation1 Connect the headset to the transceiver.2 Press and hold the key programmed as VOX for2 seconds.3 To transmit, simply speak into the microphone.• The transceiver recognizes sound levels depending onthe VOX Gain level. If it is too sensitive, it will transmitwhen there is noise in the background. If it is not sensitiveenough, it will not pick up your voice when you beginspeaking.4 When you finish speaking, transmission ends.5 To turn the VOX function OFF, press and hold the VOXkey again, for 2 seconds.Note: If a speaker/ microphone is connected to the transceiverwhile VOX is ON, and the VOX Gain Level is set to a sensitivelevel, louder received signals may cause the transceiver totransmit.