Kenwood Nexedge NX-220 Instruction Manual

Also see for NEXEDGE NX-220: Instruction manual Instruction manual Service manual Instruction manual Instruction manual

Contents

■ receivingA calling ID or text message will appear when a Status callis received. Press any key to return to normal operation.■ reviewing Messages in the Stack Memory1 Press the key programmed as [Stack], or press and holdthe key programmed as [Selcall], [Status], or [Selcall +Status] to enter Stack mode.• The last received message is displayed.2 Press the or C> key to select the desired message.• Message types are identified as follows:I: Caller ID, S: Status Message, M: Short Message• Press and hold the S key for second to cycle the displayinformation as follows:ID Name > Status/Short Message > CH/GID > Time Stamp3 Press the Side 1 key to return to normal operation.• To delete the selected message, press the A key. Toconfirm the deletion, Press the S key.• To delete all messages, press and hold the A or # key for second. To confirm the deletion, Press the S or key.SHOrT/lONG MESSAGESReceived short messages are displayed the same as Statusmessages and are stored in the same stack memory (Type I,II). To send short messages, and to send and receive longmessages, you must connect the transceiver to a PC. Askyour dealer for details.GPS rEPOrTTo send your location data, you must first connect a GPS unitto the transceiver. GPS data can be manually transmitted bypressing the key programmed as [Send the GPS data]. If set upby your dealer, GPS data may be automatically transmitted at apreset time interval.