Kenwood Nexedge NX-240 Instruction Manual

Also see for NEXEDGE NX-240: Instruction manual Function reference

Contents

4CHARGING THE BATTERY PACKThe battery pack is not charged at the factory; charge it beforeuse.ATTENTION: Always switch OFF a transceiver equipped with abattery pack before inserting the transceiver into the charger.1 Plug the AC adapter cable into the jack located on the rearof the charger.2 Plug the AC adapter into an AC outlet.3 KSC-43 Only: Match the holder to the type of battery packto be charged so that when inserting the holder, the batterytype name can be seen on the bottom of the charger. Afterinserting the holder into the charger, press the locking tabsto secure it in place.• To remove the holder, squeeze the locking tabs together thenpull the holder out of the charger.HolderLi-ion batterychargerNi-MH batterycharger4 Slide a battery pack or a transceiver equipped with abattery pack into the charging slot of the charger.• Make sure the metal contacts of the battery pack matesecurely with the charger terminals.• The indicator lights red and charging begins.IndicatorIndicator