Kenwood Nexedge NX-720H Instruction Manual

Also see for Nexedge NX-720H: Instruction manual Service manual Instruction manual

Contents

13DTMF (DUAL TONE MULTI FREQUENCY) CALLSMANUAL DIALING1 Press and hold the PTT switch.2 Enter the desired digits using the microphone DTMF keypad.• If you release the PTT switch, transmit mode will end even if the complete numberhas not been sent.• If the Keypad Auto PTT function has been enabled by your dealer, you do not needto press the PTT switch to transmit; you can make the call simply by pressing themicrophone DTMF keys.■ Store & Send1 Press the key programmed as [Autodial].2 Enter up to 30 digits using the microphone DTMF keypad.3 Press the PTT switch to make the call.AUTODIALAutodial allows you to quickly call DTMF numbers that have been programmed onto yourtransceiver.1 Press the key programmed as [Autodial].• The first entry in the Autodial list appears on the display.2 Press the / key to select an autodial list number.• You can also enter a number from 01 ~ 32 directly using the microphone DTMFkeypad.3 Press the PTT switch to make the call.■ Storing an Autodial Entry1 Press the key programmed as [Autodial Programming].2 Press the / key to select a memory location number.3 Press the S or key to enter a name for the list number.4 Press the / key to select a digit.5 Press the C> key to accept the entered digit and move the cursor to the right.• Press the A or # key to delete an incorrect digit. Press and hold the A or # keyto delete all digits.6 Repeat steps 4 and 5 to enter the entire name.7 Press the S or key to accept the name and enter a number.8 Press the / key to select a digit.• You can also enter digits directly using the microphone DTMF keypad.9 Press the S or key to accept the entered digit.• Press the A or # key to delete an incorrect digit. Press and hold the A or # keyto delete all digits.10 Repeat steps 8 and 9 to enter the entire number.11 Press the S or key to accept the number and store the entry.